Iron Man's armor (Marvel Cinematic Universe)
Iron Man's armor in the Marvel Cinematic Universe
Tony Stark has worn multiple different versions of the Iron Man armors throughout the Marvel Cinematic Universe (MCU). He has also built armor for James Rhodes (which became the War Machine armor), the Iron Spider suit for Peter Parker, and Pepper Potts' Rescue armor.
In Iron Man (2008), physical armor was built by Stan Winston Studios, with the digital version and other visual effects done by Industrial Light & Magic. Further appearances of the armor in the MCU were mainly created through visual effects. Iron Man comic book artist Adi Granov designed the Mark III, with further armors also being inspired by the armors from the comics.
Design and creation
Iron Man (2008) director Jon Favreau wanted the film to be believable by showing the eventual construction of the Mark III suit in its three stages.Stan Winston and his company were hired to build metal and rubber versions of the armors. The Mark I design was intended to look like it was built from spare parts: particularly, the back is less armored than the front, as Tony Stark would use his resources to make a forward attack. It also foreshadows the design of Obadiah Stane's Iron Monger armor. A single 90-pound (41 kg) version was built and was designed to only have its top half worn at times. Stan Winston Studios built a 10-foot (3.0 m), 800-pound (360 kg) animatronic version of the Iron Monger suit. The animatronic required five operators for the arm, and was built on a gimbal to simulate walking. A scale model was used for the shots of it being built. The Mark II resembles an airplane prototype, with visible flaps.
Iron Man comic book artist Adi Granov designed the Mark III with illustrator Phil Saunders. Granov's designs were the primary inspiration for the film's, and he came on board the film after he recognized his work on Jon Favreau's MySpace page. Saunders streamlined Granov's concept art, making it stealthier and less cartoonish in its proportions, and also designed the War Machine armor, but it was "cut from the script about halfway through pre-production." He explained that the War Machine armor "was going to be called the Mark IV armor and would have had weaponized swap-out parts that would be worn over the original Mark III armor," and that it "would have been worn by Tony Stark in the final battle sequence." Concerned with the transition between the computer-generated and practical costumes, Favreau hired Industrial Light & Magic (ILM) to create the bulk of the visual effects for the film after seeing Pirates of the Caribbean: At World's End (2007) and Transformers (2007).The Orphanage and The Embassy did additional work. To help with animating the more refined suits, information was sometimes captured by having Downey wear only the helmet, sleeves and chest of the costume over a motion capture suit.
For Iron Man 2 (2010), ILM again did the majority of the effects, as it did on the first film. ILM's visual effects supervisor on the film, Ben Snow, said their work on the film was "harder" than their work on the first, stating that Favreau asked more of them this time around. Snow described the process of digitally creating the suits:
On the first Iron Man, we tried to use the Legacy [Studios, Stan Winston's effects company] and Stan Winston suits as much as we could. For the second one, Jon [Favreau] was confident we could create the CG suits, and the action dictated using them. So, Legacy created what we called the "football suits" from the torso up with a chest plate and helmet. We'd usually put in some arm pieces, but not the whole arm. In the house fight sequence, where Robert Downey Jr. staggers around tipsy, we used some of the practical suit and extended it digitally. Same thing in the Randy's Donuts scene. But in the rest of the film, we used the CG suit entirely. And Double Negative did an all-digital suit for the Monaco chase.
Because of how form-fitting the Mark V suitcase suit was required to be, the production team researched some of the classic comics armors, since they were seen as essentially variations on muscle suits. One specific aspect of an earlier armor was the color scheme from the Silver Centurion armor. The Mark VI armor was designed by Granov and Saunders to be sleeker than the Mark III, while retaining many of the Mark III qualities.
In The Avengers (2012), Saunders stated that "director Joss Whedon was looking for something that had the 'cool' factor of the suitcase suit (from Iron Man 2), while still being a fully armored, heavy duty suit that could take on an army in the final battle." To that end, Saunders borrowed ideas that had been proposed in Iron Man 2 as well as some ideas that had been abandoned in Iron Man and merged them together in a modular suit that has big ammo packets on the arms and a backpack. In addition, the chest piece of the Mark VII was changed from the triangle shape of the Mark VI, back to the circular shape of the Mark III.Weta Digital also took over duties for animating Iron Man during the forest duel from ILM. Guy Williams, Weta's visual effects supervisor, said, "We shared assets back and forth with ILM, but our pipelines are unique and it's hard for other assets to plug into it. But in this case, we got their models and we had to redo the texture spaces because the way we texture maps is different." Williams said the most difficult part was re-creating Iron Man's reflective metal surfaces.
For Iron Man 3 (2013), Chris Townsend served as visual effects supervisor. The film featured over 2,000 visual effects shots and was worked on by 17 studios: Weta Digital, Digital Domain, Scanline VFX, Trixter, Framestore, Luma Pictures, Fuel VFX, Cantina Creative, Cinesite, The Embassy Visual Effects, Lola, Capital T, Prologue, and Rise FX. Digital Domain, Scanline VFX, and Trixter each worked on separate shots featuring the Mark XLII armor, working with different digital models. The studios shared some of their files to ensure consistency between the shots. For the Mark XLII and Iron Patriot armors, Legacy Effects constructed partial suits that were worn on set. Townsend explained that "Invariably we'd shoot a soft-suit with Robert [Downey Jr.] then we'd also put tracking markers on his trousers. He would also wear lifts in his shoes or be up in a box so he'd be the correct height – Iron Man is 6'5". Digital Domain had a small team embedded at Marvel, where Marvel's art department created flat concept art including front and back views. Digital Domain's team then created full 3D versions of 14 suits from those illustrations and later turned those assets over to Marvel and Weta Digital for use in their shots. One of the challenges of realizing the suits in 3D was in re-working the designs to ensure the suits had the correct physical aspects to allow them to show realistic movement. The heads-up display features of the helmet were inspired by visualization techniques from MRI diagnostic pattern recognition and graph theory, particularly by the connectogram, a circular graph that maps all of the white-matter connections of the human brain.
Concept art released in March 2014 for Avengers: Age of Ultron (2015), revealed the inclusion of a "Hulkbuster"–like armor. For Avengers: Infinity War (2018), visual effects vendor Framestore created Iron Man's Mark 50 suit, based on the Bleeding Edge armor from the comics, which is made up of singular nanobots which move around his body to form a suit, and was developed alongside Marvel for about two years.
List of armors
|Mark I||Iron Man||Created by Tony Stark and Ho Yinsen, the suit left the back and knees vulnerable. It had flamethrowers and a missile launcher, and was capable of one short burst of flight before it crashed. This armor is destroyed during the attack on Stark's house in Iron Man 3.|
|Mark II||This armor improves flight capabilities, adds a heads-up-display and repulsors, and has a built in arc reactor. However, the suit experiences icing problems when flown at too high an altitude. The suit needs a special construction/removal apparatus to get in and out of the armor. This armor is destroyed during the attack on Stark's house in Iron Man 3.|
|Mark III||The Mark III fixes the freezing problem by changing the suit to a gold-titanium alloy. It also adds wrist-mounted missiles, hip-mounted flare launchers and shoulder-mounted machine guns. This is the first armor to feature the classic red and gold color scheme. This armor is destroyed during the attack on Stark's house in Iron Man 3.|
|Mark IV||Iron Man 2||Not much is known about the Mark IV as it is briefly seen when Stark enters the Stark Expo 2010. However, it does have a manually removable helmet. This armor is destroyed during the attack on Stark's house in Iron Man 3.|
|Mark V||The Mark V is a travel, portable suit, also known as the "suitcase suit", that assembles around Stark's body. Not much else is known about the armor, such as if it has flight capabilities. The armor takes on a red and silver color scheme, similar to the Silver Centurion armor from the comics. This armor is destroyed during the attack on Stark's house in Iron Man 3.|
|Mark VI||This armor changes the arc reactor hole to a triangular shape instead of the traditional circular one. The armor also upgrades its artillery to include a grenade launcher in one arm, a missile launcher in a shoulder and metal-slicing super lasers in both arms (though this can only be used once). The color scheme is once again the classic red and gold. Stark uses this armor for much of The Avengers before switching to the Mark VII after the Mark VI suffers damage. This armor is destroyed during the attack on Stark's house in Iron Man 3.|
|Mark VII||The Avengers||The suit is able to assemble around Stark via bracelets worn by him, and brings back the circular arc reactor hole. The suit is not designed for deep space travel. This armor is destroyed during the attack on Stark's house in Iron Man 3.|
|Mark XLII||Iron Man 3||This prehensile suit is able to be summoned remotely by controlling each individual piece of the armor, through state-of-the-art chips in Stark's body, and features an inverse color scheme to the other main armors, with gold as the predominant color. Stark is able to operate the suit externally from a remote location. This armor is destroyed at the end of Iron Man 3.|
|Mark XLIII||Avengers: Age of Ultron||This suit is identical to the Mark XLII, but with an inverse red/gold color scheme. The Mark XLIII has an unmanned sentry mode that allows Stark to exit the suit and remain protected. It can also be augmented with the Mark XLIV "Veronica" modular add-on in order to take on the Hulk.|
|Mark XLV||Featuring a predominantly red color scheme and a hexagonal-shaped arc reactor, Stark wears this suit during the Avengers' final confrontation with Ultron in Sokovia.|
|Mark XLVI||Captain America: Civil War||Visually similar to the Mark XLV with a pentagon-shaped arc reactor. The helmet is retractable and able to fold into the back of the suit. The suit uses hybrid nanotechnology, and is an homage to the character's Bleeding Edge armor from the comics.|
|Mark XLVII||Spider-Man: Homecoming||A predominately silver color scheme with the head, chest and extremities also featuring gold and red. The armor is visually similar to the one worn by Ultimate Iron Man in the comics. Like the Mark XLII, the armor can be controlled remotely by Stark.|
|Mark L||Avengers: Infinity War||Known as the Bleeding Edge armor, it has rocket thrusters that allows Stark to travel in deep space. The suit has the ability to form around Stark out of his arc reactor using nanotechnology, which can regenerate itself if it sustains damage. Visually, this armor is based on the Model Prime armor from the comics. The mark number has been stylized as both decimal (50) and Roman numeral (L). The helmet is briefly seen in Avengers: Endgame when Stark uses it to record a goodbye message while trapped in outer space.|
|Mark LXXXV||Avengers: Endgame||This armor has a similar look to the Mark L, with gold upper sleeves, shoulder guards, and a slightly bulkier design. It retains the nanotechnology from the Mark L and has the ability to form an Infinity Gauntlet.|
These armors were created before the beginning of Iron Man 3 by Stark, where they were introduced, to help in different types of situations he might encounter. They are first referenced to as the "Iron Legion" in Iron Man 3 Prelude #2 (April 2013). The first Iron Legion is a set of specialized armors built for various situations that he might encounter such. Built due to his insomnia, he eventually destroys them due to the friction they cause between him and Pepper Potts. The second Iron Legion is a set of drones built by Tony Stark in order to aid the Avengers. However, after the creation of the AI Ultron, it builds itself a body from a destroyed drone, and takes control of the rest.
It appeared in the film Iron Man 3.
|Mark XV||Sneaky||A stealth suit that is virtually invisible to enemy early-warning systems. A chrome colored coating on the armor can darken or lighten to match the environment.|
|Mark XVI||Nightclub||A black stealth suit similar to the Mark XV armor. However, it does not have all of the weapons and is designed for stealth missions.|
|Mark XVII||Heartbreaker||An artillery level repulsor transmitter (RT) suit, that has an oversized chest RT, which can fire powerful blasts and narrow or wide beams. It can also generate a repulsor shield for protection.|
|Mark XVIII||Casanova||A stealth artillery level RT suit.|
|Mark XIX||Tiger||A high velocity prototype suit.|
|Mark XX||Python||A long distance suit.|
|Mark XXI||Midas||A high altitude suit.|
|Mark XXII||Hot Rod||The War Machine 2.0 prototype.|
|Mark XXIII||Shades||An extreme heat suit.|
|Mark XXIV||Tank||A heavy combat suit.|
|Mark XXV||Striker||A heavy construction suit that was designed to help with construction. Its powerful jackhammer-like arms can pulverize concrete and can withstand high temperatures and electrical surges. This suit is also known as "Thumper".|
|Mark XXVI||Gamma||A heavy construction suit upgrade.|
|Mark XXVII||Disco||A chameleon suit.|
|Mark XXVIII||Jack||A radiation zone suit.|
|Mark XXIX||Fiddler||A nimble construction suit.|
|Mark XXX||Blue Steel||The "Silver Centurion" suit upgrade.|
|Mark XXXI||Piston||A high velocity centurion suit.|
|Mark XXXII||Romeo||An enhanced RT suit.|
|Mark XXXIII||Silver Centurion||An enhanced energy suit, that has a slight protective force field, which allows it to attract or repulse objects using magnetic polarity. The suit is capable of firing pulse cannons that build in intensity the further they travel.|
|Mark XXXIV||Southpaw||A disaster rescue prototype suit.|
|Mark XXXV||Red Snapper||A disaster rescue suit that was designed to survive in dangerous places and has extendable arms and claws making it ideal for disaster rescue.|
|Mark XXXVI||Peacemaker||A riot control suit.|
|Mark XXXVII||Hammerhead||A deep sea suit that was designed to be able to travel to the deepest parts of the ocean where it can withstand extreme pressure, and has high-power work lights to allow visibility in murky waters.|
|Mark XXXVIII||Igor||A heavy lifting suit that was not designed for battle, but for heavy lifting and carrying heavy objects.|
|Mark XXXIX||Gemini||A sub-orbital suit that was designed for otherworldly journey and has an integrated, removable booster pack and zero-gravity maneuvering thrusters. This suit is known as "Starboost" in the official Iron Man 3 game.|
|Mark XL||Shotgun||A hyper velocity suit that was designed for hypersonic speed and can travel in excess of Mach 5.|
|Mark XLI||Bones||A skeleton suit that is a black and gold, lighter version of a full Iron Man suit, with a focus on speed and maneuverability.|
|Mark XLIV||Avengers: Age of Ultron||A modular add-on known as the Hulkbuster armor, it was developed by Tony Stark and Bruce Banner, after they studied the Hulk's physical actions and strength levels in an effort to find a way to contain him and minimize the damage caused by his rages. Its codename is "Veronica", in a reference to Archie Comics. Banner is involved with Betty Ross, so Age of Ultron director Joss Whedon went for the two women that dispute Archie Andrews' affection - "the opposite of Betty is Veronica".|
|Mark XLVIII||Avengers: Infinity War||An update to the Mark XLIV modular add-on, and known as Hulkbuster 2.0, it features a sleeker, less blocky design, with additions of silver in its color scheme. Unlike the original Hulkbuster, it can apparently be used on its own without being 'worn' over another armor, with Banner using the Hulkbuster during the battle for Wakanda against Thanos's forces when he finds himself unable to transform into the Hulk. Banner also briefly uses it at the beginning of Avengers: Endgame.|
War Machine armor
|War Machine Mark I||Iron Man 2||Originally the Iron Man Mark II armor, this suit is confiscated by James Rhodes on behalf of the US Government and enhanced by Justin Hammer, who adds machine guns in the wrists, a minigun on the right shoulder and a grenade launcher on the left. The armor still retains repulsors in the chest and hands. In Iron Man 3 Prelude, Stark reclaims the Mark II armor from Rhodes and removes all the modifications done to it by Hammer.|
|War Machine Mark II / Iron Patriot||Iron Man 3||The second War Machine armor, given to Rhodes by Stark, has a rectangular-shaped chestplate protecting the arc reactor assembly. In Iron Man 3, Rhodes was asked by the president to take on the moniker, "Iron Patriot", and add a red, white, and blue color scheme to be used as the government's "American hero" symbol in response to the events in The Avengers. The armor reverts to the grey and silver color scheme in Avengers: Age of Ultron.|
|War Machine Mark III||Captain America: Civil War||The armor worn in Civil War appears similar to the others seen. It is damaged through friendly fire when Rhodes is struck by a Mind Stone beam fired by Vision, which disables the suit's flight capacity, and Rhodes falls to the ground, paralyzing him from the waist down on impact.|
|War Machine Mark IV||Avengers: Infinity War||This version of the armor includes an "exo-skeleton" worn on his legs and lower back when Rhodes is not wearing the full armor, allowing him to walk despite the spinal injuries sustained in Civil War.|
|War Machine Mark VI||Avengers: Endgame|||
|War Machine Mark VII||Known as the Cosmic Iron Patriot armor, it has a red, white, and blue color scheme similar to the Iron Patriot armor. It is bulkier than past War Machine armors, and was built with alien technology. The armor has two shoulder guns, turrets, and rocket launchers, with additional weaponry on the forearms.|
Non-Iron Man armors
|Iron Monger||Iron Man||Suit created by Obadiah Stane, based on the designs Stark used to create the Mark I armor.|
|Iron Spider||Spider-Man: Homecoming||A nanotech armor given to Peter Parker. This armor has enhanced web shooters, a parachute, life support systems, and four robotic spider legs coming out of the back.|
|Rescue||Avengers: Endgame||A blue and gold armor designed by Stark for Potts.|
|Hydra Stomper||What If...?||Introduced in the first episode, the Hydra Stomper is an armor made by Howard Stark and is piloted by a non-superpowered Steve Rogers in World War II. It shares a similar design with the Iron Man Mark I but has an energy repulser. The entire armor is powered by the Tesseract.|
Avengers Campus will have an exclusive Iron Man armor for Disney Parks, known as the Mark 80.
- ^Quint (February 9, 2007). "Quint visits the Iron Man production offices! Art! Favreau speaks about sequels (?!?), casting and more!!!". Ain't It Cool News. Archived from the original on March 28, 2019. Retrieved February 10, 2007.
- ^ abcde"Iron Man Production Notes". SciFi Japan. April 30, 2008. Archived from the original on May 1, 2008. Retrieved March 28, 2013.
- ^ abDouglas, Edward (April 29, 2008). "Exclusive: An In-Depth Iron Man Talk with Jon Favreau". Superhero Hype. Archived from the original on February 10, 2014. Retrieved April 29, 2008.
- ^"Who Designed the Iron Man Suit?". Superhero Hype. May 6, 2007. Archived from the original on April 15, 2016. Retrieved May 6, 2007.
- ^Vespe, Eric (July 28, 2007). "Quint goes one on one with Jon Favreau about Iron Man at Comic-Con!!!". Ain't It Cool News. Archived from the original on September 29, 2007. Retrieved July 29, 2007.
- ^Sciretta, Peter (October 21, 2008). "Iron Man: Official War Machine Concept Art". /Film. Archived from the original on September 7, 2011. Retrieved March 25, 2020.
- ^Rotten, Ryan (April 1, 2008). "Iron Man: The Set Visit - Jon Favreau". Superhero Hype. Archived from the original on December 24, 2015. Retrieved April 1, 2008.
- ^ abRobertson, Barbara (February 21, 2011). "ILM VFX Supervisor Ben Snow on Iron Man 2". Studio Daily. Archived from the original on June 6, 2012. Retrieved August 24, 2012.
- ^ abAnders, Charlie Jane. "Design secrets of Iron Man 2: Suitcase armor, Whiplash and crazy improv!"Archived 2015-09-20 at the Wayback Machine. io9. May 21, 2010
- ^ abPham, Christina; Strom, Marc (March 1, 2012). "Essential Avengers: Designing Iron Man". Marvel Comics. Archived from the original on March 2, 2012.
- ^Desowitz, Bill (May 4, 2012). "Getting Animated Over The Avengers". Animation World Network. Archived from the original on December 11, 2015. Retrieved May 6, 2012.
- ^Seymour, Mike (May 6, 2012). "VFX roll call for The Avengers (updated)". Fxguide. Archived from the original on October 11, 2019. Retrieved May 15, 2012.
- ^Failes, Ian (May 6, 2013). "'Iron Man 3': more suits to play with". Fxguide. Archived from the original on March 25, 2020. Retrieved May 7, 2013.
- ^Hellard, Paul (May 7, 2013). "CGSociety: Production Focus". Archived from the original on May 22, 2013. Retrieved May 22, 2013.
- ^Barbas, Helen (October 2017). Goncalves, Paulo J.S. (ed.). VR, AR, MR Simulations and Inspirations from 'Iron Man 3'(PDF). European Simulation and Modelling Conference. p. 26. Archived(PDF) from the original on December 13, 2017. Retrieved November 6, 2017.
- ^ abKeyes, Rob (March 18, 2014). "First Look At Quicksilver, Scarlet Witch & Hulkbuster Designs in 'The Avengers 2′". Screen Rant. Archived from the original on March 19, 2014. Retrieved March 18, 2014.
- ^ abc"Avengers: Infinity War". Framestore. Archived from the original on May 14, 2018. Retrieved May 14, 2018.
- ^ abcdefghPlumb, Alastair. "The Evolution Of Iron Man's Suits". Archived from the original on May 10, 2012. Retrieved April 9, 2013.
- ^ abcdefghijklmnopqrstuvwxySilverio, Brian (May 8, 2013). "Closer Look At Armors & Unused Concepts For 'Iron Man 3'". Archived from the original on June 7, 2013. Retrieved May 10, 2013.
- ^ abcdefghijklmJohnson, Scott (April 2, 2013). "Iron Man 3: Suits Of Armor Revealed". Archived from the original on April 8, 2013. Retrieved April 9, 2013.
- ^"'Iron Man 3' Fun Facts, Suit and Prop Exhibition at Disneyland (Minor Spoilers)". Stitch Kingdom. March 28, 2013. Archived from the original on November 11, 2017. Retrieved October 18, 2020.
- ^"Iron Man's Mark XLIII Armor from Avengers: Age of Ultron Revealed". ComingSoon.net. December 15, 2014. Archived from the original on October 23, 2020. Retrieved October 18, 2020.
- ^"Avengers: Age of Ultron". Method Studios. Archived from the original on May 12, 2015. Retrieved May 12, 2015.
- ^Perry, Spencer (December 18, 2015). "Choose a Side with the Captain America: Civil War Hot Toys". ComingSoon.net. Archived from the original on December 18, 2015. Retrieved December 18, 2015.
- ^Seymour, Mike (May 24, 2016). "Captain America: a very civil war". FX Guide. Archived from the original on May 26, 2016. Retrieved May 26, 2016.
- ^Lussier, Germain (April 24, 2017). "Our Best Look Yet at Iron Man's New Suit From Spider-Man: Homecoming". io9. Archived from the original on April 24, 2017. Retrieved April 24, 2017.
- ^Dokterman, Eliana (April 27, 2018). "What to Know About Spider-Man and Iron Man's New Suits in Avengers: Infinity War". Time. Archived from the original on April 28, 2018. Retrieved April 28, 2018.
- ^Staley, Brandon (March 2, 2018). "First Detailed Look at Iron Man's Infinity War Armor is from Hot Toys". Comic Book Resources. Archived from the original on March 4, 2018. Retrieved March 4, 2018.
- ^ abAliev, Ben (May 31, 2020). "Avengers Arsenal: The Best Iron Man Suits in Tony Stark's Armory". Comic Book Resources. Archived from the original on June 29, 2020. Retrieved August 11, 2020.
- ^Chow, Nicholas (April 1, 2019). "Here's Your Best Look At Iron Man's New Armour In 'Avengers: Endgame'". Rojak Daily. Archived from the original on July 12, 2019. Retrieved April 28, 2019.
- ^Gage, Christos; Pilgrim, William Corona (w), Kurth, Steve (p), Geraci, Drew (i), Sotocolor (col). Iron Man 3 Prelude 2 (April 2013), New York City: Marvel Comics
- ^ abcdef"Marvel's Iron Man 3 Armor Unlock Reveal". Facebook. March 28, 2013. Archived from the original on December 4, 2020. Retrieved March 28, 2013.
- ^Buffa, Chris (April 26, 2013). "Iron Man 3: The Official Game Armor". Archived from the original on May 9, 2013. Retrieved May 6, 2013.
- ^White, Brett (March 25, 2015). ""Avengers" Fun Facts Reveal New Scarlet Witch, Hulkbuster Details". Comic Book Resources. Archived from the original on March 26, 2015. Retrieved March 25, 2015.
- ^Rivera, Joshua (October 22, 2014). "'Avengers: Age of Ultron' trailer is here: What we learned". Entertainment Weekly. Archived from the original on October 23, 2014. Retrieved October 23, 2014.
- ^Schedeen, Jesse (December 19, 2014). "NEW STAR WARS & AVENGERS FIGURES COMING FROM HOT TOYS". IGN. Archived from the original on December 19, 2014. Retrieved December 19, 2014.
- ^Bean, James (April 11, 2015). "'Avengers: Age of Ultron' director and cast answer our questions". Hypable. Archived from the original on April 15, 2015. Retrieved April 24, 2015.
- ^Matadeen, Renaldo (January 17, 2018). "Hulkbuster 2.0 Design Showcased in Avengers: Infinity War Licensing Art". Comic Book Resources. Archived from the original on January 18, 2018. Retrieved January 18, 2018.
- ^ abGage, Christos, Pilgrim, William Corona (w), Kurth, Steve (p), Geraci, Drew (i), Sotocolor (col). Iron Man 3 Prelude 1 (March 2013), New York City: Marvel Comics
- ^Keyes, Rob (March 23, 2013). "Iron Man 3: The Story Behind Rhodey & The Iron Patriot Armor". Screen Rant. Archived from the original on November 27, 2013. Retrieved October 18, 2020.
- ^Schedeen, Jesse (April 10, 2015). "NEW HOT TOYS FIGURE REVEALS WAR MACHINE'S AGE OF ULTRON ARMOR". IGN. Archived from the original on April 11, 2015. Retrieved April 11, 2015.
- ^Collinson, Gary (February 12, 2016). "Hot Toys Iron Man and War Machine collectible busts from Captain America: Civil War". Flickering Myth. Archived from the original on May 7, 2016. Retrieved May 6, 2016.
- ^Erao, Matthew (February 23, 2018). "Infinity War Merchandise Highlights War Machine's New Armor". Screen Rant. Archived from the original on June 8, 2018. Retrieved May 7, 2018.
- ^ abDumaraog, Ana (January 30, 2020). "What War Machine's Cosmic Endgame Armor Could Have Looked Like". Screen Rant. Archived from the original on January 31, 2020. Retrieved August 11, 2020.
- ^ abBacon, Thomas (December 14, 2019). "War Machine Is Earth's MIGHTIEST Avenger". Screen Rant. Archived from the original on January 21, 2020. Retrieved August 11, 2020.
- ^ abCardona, Ian (April 24, 2020). "New Endgame Statue Reveals Why Iron Patriot Is the MCU's DEADLIEST Avenger". Comic Book Resources. Archived from the original on August 11, 2020. Retrieved August 11, 2020.
- ^Cardona, Ian (April 10, 2020). "The MCU's Strongest Armor Is NOT the Hulkbuster - Or Even an Iron Man Suit". Comic Book Resources. Archived from the original on April 20, 2020. Retrieved August 11, 2020.
- ^Bonomolo, Cameron (March 11, 2020). "Every Marvel Superhero Showing Up At Avengers Campus Revealed". Comicbook.com. Archived from the original on December 2, 2020. Retrieved February 14, 2021.
The MARK XIII is the thirteenth Iron Man suit Tony built, the sixth suit in the Iron Legion, the fourth Advanced Iron Man suit and is the first suit to feature a rectangular miniature arc reactor. Due to the suit’s lighter than average composition and the modified RT, the MK13 is one of the fastest suits Tony created.
The MK13 featured slight redesigns to the chest and legs, making the armor more streamlined and aerodynamic.
The MK13 arrived at the Battle on the Norco when Tony had J.A.R.V.I.S initiate the House Party Protocol. The MK13 managed to survive the battle and was the twelfth suit to be destroyed when Tony had J.A.R.V.I.S initiate the Clean Slate Protocol.
- Designer – Tony Stark
- User – Tony Stark
- Code Name – None
- Armor Class – Advanced Iron Man Suit
- Armor Type – Velocity Suit Prototype
- Armor Color – Black with silver plates
- Armor Height – 6’0 ft.
- Status – Destroyed
- Power Core – New Element Arc Reactor Mark II
- Armor Features – Rectangular miniature arc reactor, high altitude and high speed flight, increased agility, new armor composition and design
- Armor Systems– J.A.R.V.I.S OS, Status system, Propulsion system, Advanced biometric donning system
- Weapons – Repulsors, Unibeam, 200-Petawatt laser, mini missiles, flares, mini-guns
- Armor Composition – Aluminum and titanium steel plating
- Armor Capabilities – Super strength, enhanced durability, superior flight capabilities, ice resistance, rapid biometric deployment, high speed and high altitude flight
- Predecessor – MARK X
- Successor – MARK XIX
- Preceded By – MARK XII
- Followed By – MARK XIV
- First Appearance – Iron Man 3
Features and Capabilities
- Rectangular Miniature Arc Reactor – The modified Arc Reactor gave the MK13 the additional power needed for higher flight altitude and speed.
- High Altitude, High Speed Flight, Increased Agility – Due to the modified Arc Reactor and the lighter than normal plating, the MK13 was the fastest suit of its predecessors and remains one of the fastest suit Tony has created.
- New Armor Composition and Design – The MK13 featured a more streamlined design making it more aerodynamic and was lighter than it’s predecessors due to the aluminum and titanium steel plating of the armor.
- Mini-guns – Like the MK18, MK22 and War Machine Armor Mark II/Iron Patriot, the MK13 has a mini-gun in each gauntlet.
- Standard Iron Man suit weapons – this suit possesses the signature Repulsor gauntlets, Unibeam, shoulder-mounted guns, side winders, guided missiles, micro munition missiles, rockets, 200-Petawatt lasers and flares.
- Standard Iron Man suit systems – this suit possesses the standard Iron Man suit systems including the J.A.R.V.I.S OS, the propulsion system and the advanced biometric donning system.
Thank you for reading. If you enjoyed this post, you can find more of my thoughts on twitter, @historyofthemcu. Additionally, @bloodybaroness and myself host The History of the MCU Podcast, a weekly podcast that reviews and analyzes not only the Infinity Saga but the new Marvel Studios Disney+ shows beginning with WandaVision. We would love if you gave us a listen and are currently available on Apple Podcasts, Spotify, Podbean, Google Podcasts, iHeartRadio and Amazon Music.
This Article is part of the Marvel Cinematic Universe (Earth-199999) - the universe that takes place within the MCU franchise. It is therefore regarded as Official and Canon Content, and is connected to all other MCU related subjects.
Advanced Iron Man Suit
Velocity Suit Prototype
Black With Silver Plates
Arc Reactor Mark II
Aluminum and Titanium Steel Plating
New Armor Composition
Advanced Donning System
- Tony Stark: "You're right, we do need back up."
- Rhodey: "Yeah, a bunch."
- ―Tony and Rhodey talking about the "House Party Protocol" suits, while waiting for them to show up.
The Mark XIII (Mark 13), was the fourth Advanced Iron Man Suit, and was the thirteenth suit created and built by Tony Stark, after the successful completion of the Mark XII, sometime after the events of The Avengers.
It was featured in the movie Iron Man 3 and made its debut when Tony ordered J.A.R.V.I.S. to initiate the "House Party Protocol", in which it was activated along with all the other suits to aid Tony in his battle against Aldrich Killian.
This was also was the first suit to feature a rectangular design chest piece for its Arc Reactor.
The Mark XIII design is streamlined, built for aerodynamic flight potential. The modified rectangular arc reactor provides it with enough power to achieve flight and have maneuverability over other suits.
It resembles the original basic suits in overall design, only being black with silver plates and having a different reactor core. It is also notable for having lighter armor than previous incarnations of the design, utilizing aluminum and titanium steel over the original composites from the earlier designs.
Like all the previous Mark armors (except the Mark I), the Mark XIII is capable of flight. This suit can fly much faster and more aerodynamically than its predecessors.
The Mark XIII, along with all the other newly built Mark suits, uses a more advanced technology that was based off on the Mark VII's technology, which is able to wrap itself around Tony's body, without the aid of robotic arms or any external mechanicals.
It can flexibly open itself to allow Tony to enter into the suit and automatically wrap itself around him, anywhere at any time, much like the Mark XLII's technology and the other newly built Mark suits'.
New Arc Reactor
The armor features a unique rectangular arc reactor, which can't be found in the previous armors.
The Mark XIII has standard based Repulsors.
The Mark XIII has a vertical rectangular shaped Unibeam powered by the new and improved Arc Reactor Mark II. It has a high power output, and is colored light blue with a glow coming from the Arc Reactor built into the armor's chest piece.
Numerous miniature air-to-air missiles are housed in the shoulder pods, which are a part of the detachable backpack. The shoulder pods house miniature missiles and can fire up to 92 missiles at once.
More missiles are located inside the legs, presumably for air-to-ground attack when flying horizontally over a target.
This armor is equipped with a minigun on each of its gauntlets, just like the Mark XVIII, Mark XXII, and War machine Armor Mark II/Iron Patriot
This armor contained numerous infrared flares, another feature common with its predecessors.
Before Iron Man 3
The Iron Legion and Creation
Sometime after the Battle of New York, Tony, who was haunted by what happened in New York, got obsessed with making more Iron Man suits. One of them was the Mark XIII.
Completion and Storage
After creating the Mark XIII suit, he kept it under his house in the place called the Hall of Armors, in where he kept all the other Mark suits that he had created one after the other except for the original 7 Mark Armors. After he was finished creating the Mark Mark XIII, he pursued to creating the next Mark suit, which was the Mark XIV.
Iron Man 3
When Tony's Malibu Mansion was raided, and later destroyed, the Mark XIII along with the rest of the Iron Legion was still stored safely within the Hall of Armors Extension, as it was left undamaged during the attack. The chamber was still intact, completely sealed, and concealed from view.
This was part of Stark's plan, in which the Iron Legion was to be used later after he uncovered the truth behind the Mandarin and A.I.M.
Activation of the "House Party Protocol"
The Mark XIII was activated by J.A.R.V.I.S. along with all the other armors in the basement of Tony's Malibu Mansion, under the order of the House Party Protocol issued by Tony. It then flew out of the Hall of Armors and went towards the Roxxon Oil Rig, together with the other 34 armors. Tony then orders J.A.R.V.I.S. to "Target Extremis heat signatures. Disable with extreme prejudice.", J.A.R.V.I.S. responds by saying "Yes sir!", which echoes out through all of the suits, including the Mark XIII. The armor then starts targeting and attacking the Extremis Soldiers. It fights them off during the ongoing battle with help of the other armors. The armor was presumed to have fought and killed several Extremis Soldiers during the fight, as it was one of the last 21 armors left standing and succeeded in eliminating the remaining extremis forces with the help of the other Iron Legion armors. The Mark XIII then resumes to flying around the oil rig in the aftermath of the battle.
"Clean Slate Protocol"
The Mark XIII was then detonated by J.A.R.V.I.S. for fireworks along with the other 20 armors, under Tony's order of the "Clean Slate Protocol". This was to show Tony's devotion to his girlfriend, Pepper Potts. It was the 12th suit to detonate.
Marvel's Iron Man 3 - JARVIS: A Second Screen Experience
VELOCITY SUIT PROTOTYPE WITH PRELIMINARY CHEST PLATE REDESIGN FOR HIGH ALTITUDE FLIGHT AND PRESSURE RESISTANCE.
- There are no current notes available on this topic, as of the moment.
- This is the first armor to have a rectangular Arc Reactor on its chest piece. A feature that would be the base design for future armors in the Iron Legion.
- This is the first and only armor to have aluminum and titanium steel armor plates.
- This is the fastest suit among any of its predecessors, but it would soon be succeeded by much faster armors such as the Mark XIX, Mark XXXI and Mark XL.
- This is the fourth fastest suit, the first being the Mark XL, the second being the Mark XXXI, and the third being the Mark XIX.
A maximum of 12 IMAGES ONLY can be displayed in this Page's Gallery.
If you wish to Add More Images on the topic or View the Full Gallery of the page, click here.
- There are no References to display.
The Mark XIII (13), was the fourth Advanced Iron Man Suit, and was the thirteenth suit created and built by Tony Stark, after the successful completion of the Mark XII, sometime after the events of The Avengers.
It was featured in the movie Iron Man 3, and made it's debut in the movie when Tony ordered J.A.R.V.I.S. to initiate the "House Party Protocol", in which it was activated along with all the other suits to aid Tony in his battle against Aldrich Killian.
This was also was the first suit to feature a rectangular design chest piece for it's Arc Reactor.
The Mark XIII design is streamlined, built for areodynamic flight potential. The modified rectangular arc reactor provides it with enough power to acheive flight and have maneuverability over other suits.
It resembles the original basic suits in overall design, only being silver and having a different reactor core. It is also notable for having lighter armor than previous incarnations of the design, utilizing alluminum and titanium steel over the original composites from the earlier designs.
Suit iron 13 man mark
.Iron Man Science Project - Extended Version (Verizion FiOS Commercial)
You will also like:
- Hp flat keyboard
- Peterbilt headlight housing
- Graco spray repair
- Leaf wallpaper bedroom
- Slime squishy toys
- Lancer tv series download
- Performance bagger floorboards