Heres my new 300 Norma Improved/338 Norma Improved switch barrel I built myself. Finished it a couple months ago but haven't had time to post. It has the foll...owing:
Borden Bigfoot Action that came timed to the Triggertech Diamond
Manners EH1 with their 3 oz cheek piece
Proof Research 30 cal 1.250 shank 9.0 tw 26" finish
Proof Research 338 cal 1.250 shank 9.4 tw 26" finish
Titanium Self Timing 5 Port "Muscle" Brake in 3/4x24 threads
Hawkins DBM bottom metal
0.7 oz arca rail
Tangent Theta 3-15m bedded into a set of NF Rings
Cadex Falcon Lite Bipod
This rifle pounded tiny little groups right off the bat. Shots 2,3,4 down the rifle measured .263"@100 yds.
I have the 230 & 245 bergers shooting tiny groups with RETUMBO. With very little load development I shot a 1.172" group at 580 yds with the 245s and a 1.834" group with the 230s at 580 yds.
That Tangent Theta 3-15M is the best hunting scope Ive seen. The parallax is the most forgiving by far. Set it at 500 yds and your good from 300-1000+ yds. Id still have no problem shooting game at 100 without adjusting the parallax. However if your wanting to shoot 1/4 moa or smaller groups youd want to adjust it a hair. The glass is absolutely phenomenal as is the turrets. Weighs 28 oz.
I built this rifle with the thoughts of having everything absolutely top of the line. Its far exceeded my expectations so far. It won't be for sale down the road LOL.
Piercision RiflesBorden AccuracyManners Composite StocksPROOF ResearchHawkins PrecisionTriggertechTangent Theta IncorporatedNightforce OpticsCadex DefenceBerger Bullets
Moderated by RickBin, SYSOP
- Danvers police station
- Hazbin hotel fanfiction
- Targus displaylink drivers
- Cars movie motorcycle
- Cranuim games
RIFLES INC TIMBERLINE 270WIN USED GUN INV 213809
RIFLES INC. CLASSIC WITH A BORDEN TIMBERLINE ACTION CHAMBERED IN 270WIN WITH A 26 INCH LILJA FLUTED BARREL, COMES WITH CASE AND ATTACHED SWAROVSKI 2.5-10X42 SCOPE AND HAS TEST TARGETS AVAILAVBLE, AND A MCMILLEN SCOPE. PREVIOUS OWNER STATES THAT ONLY 1 BOX OF SHELLS HAVE BEEN FIRED IN THE FIREARM. THE ACTION IS STAINLESS AND HAS BEEN CERAKOTED BLACK, IT IS NOT BLUED. THIS GUN IS IN EXCELLENT CONDITION AND IS COVERED BY DURY'S LIFETIME WARRANTY.
WE BUY GUNS!
NO COLLECTION TOO BIG OR SMALL
FOR OUR GUN INTERNATIONAL CUSTOMERS ALL OF OUR FIREARMS CAN BE PURCHASED
DIRECTLY FROM OUR DURY'S GUNS WEB-SITE
BackBorden Timberline Receiver
These are the most accurate repeater hunting actions on the market. They are manufactured to true benchrest tolerances and yet are made to be reliable in the field.
Timberline Actions fit stocks inletted for Remington 700 long actions (Repeater action weighs 808gm)
Action Footprint designed to be drop in for stocks inletted for Remington 700 (standard action now has straight machined handle and McMillan offers that inletting Rem 700 handle still available for those that want to fit stocks already inletted for Rem 700 with Rem 700 handle)
◦Hardened Stainless Steel Action Body(40 Rc)
◦Hardened and ground 4140 Bolt Body (44 Rc)
◦Bolt Body to Action Body clearance <.002 inch
◦Bolt Face perpendicular within .0002 inch -This is best in industry
◦Manufactured Right Hand or Left hand
◦Bolt Head and lugs designed to smoothly fit action raceway so that “anti-bind rail” is not needed
◦1 1/16 x 18 TPI Threading for barrel tenon
◦Neatly executed spiral fluting on bolt body
◦Silver brazed on Borden Machined Bolt Handle (Remington 700 handle available as option)
◦There are NO TAPS used in the manufacture of these actions
◦Thread Milled 8×40 Blind Scope block holes
◦Thread Milled 1/4×28 Guard Screw Holes
◦Standard and “Magnum” port length available for each model
◦Remington and Wyatt magazine wells available in each model
◦Single shot and repeaters available in each model
◦Proprietary feed rails designed to smooth feed even Short Magnums and Ultra Magnums
◦Medium Sako Style Extractor installed with plunger positioned for low ejection angle
◦M16 style extractor available on bolts with 308 and magnum boltfaces-no extra charge
PLEASE NOTE: We can only ship this to a dealer. Please contact us if you would like to purchase so we can discuss your dealer of choice and calculate accurate freight.
Sale borden timberline for
Rifle above is an example of Borden Hunting Rifle with A3 Stock
Price without Swarovski 3 1/2×18 BRH Scope-$5100.00 (unfired)
(block bedded edge Technology A3 stock by TM Stockworks, texture finish, muzzle brake, machined floorplate; Trigger Tech trigger
Timberline Magnum action, Talley Lightweight Rings)
Weight is under 9# with scope (#4 barrel).
Click on either rifle picture above for bigger picture.
Complete load development with accuracy guarantee available at extra cost for some calibers
We also build build barreled actions that you can choose your own stocker or we can direct you to our preferred stocker.
Complete barreled actions start at $2850.00
Includes Alpine, Ridgeline, Mountaineer or Timberline action, fitted and chambered Hart barrel; Trigger Tech trigger; machined floorplate system,
Talley Lightweight Rings and Seating Depth gauge
Barrel fluting, muzzlebrakes and coating are extra charge
Borden Rimrock / Timberline- Long Scope Mount
(Click for larger image)
Details:CNC machined stainless steel or titanium Picatinny spec. rifle scope base.
Proudly made in the USA.
Application: Borden Rifles Rimrock / Timberline - Long Action.
- Weight: Stainless: -- oz, Titanium: -- oz
- Length: 6.305"
- Height: .390"
- 1st to 2nd: 0.860"
- 1st to 3rd: 5.050"
- 1st to 4th: 5.910"
Hole Spacing (From Rear):
** Each base ships with #8-40 alloy steel Torx screws, and a T15 Torx wrench.
- Nevada unemployment insurance
- Team rar backpack
- 2017 yz450f specs
- Pug yorkie mix
- Wells fargo electronic deposit limit
- Male yeast infection cure fast
- Minecraft pe seed big village
- Rahu kalam today bangalore
- Ram console safe
- 5e artificer dndbeyond
- Htc pc suites
- Canon ct v1
- Caterpillar oil coolers
Scope mounts for Borden Accuracy Timberline
Borden Accuracy is an American rifle and action producing company from Springville, Pennsylvania, United States. Company produces Custom Hunting and Benchrest rifles, based on their own actions. They design rifles on Remington 700 and McMillan stocks. Borden Accuracy offers a wide range of different actions, which are manufactured to rifles, mostly on Remington 700,Holland Pattern, Monte Carlo and McMillan stocks. Their Actions are. Alpine, Timberline, Mountaineer, Ridgeline and Rimrock (LSR, SSR).Alpine actions fit stocks inletted for Remington 700 SA, Ridgeline actions are inletted for Remington 700 SA and LA stocks, while Timberline are inletted only for Remington 700 LA. Jim Borden founded Bordey Accuracy with his family, which means that the company is a family run business. They won several awards for manufacturing one of the best Benchrest rifles in the world in the past years.
Physical properties and dimensions:
Borden Timberline is a Custom made Bolt-Action rifle. Action is of Long style (LA). Like all Borden rifles, this model is also designed with Push – Feed style action. Rifle's action is designed with a titanium body. Timberline models of Borden rifles are designed either with Single shot, Remington STD Magnum, Remington Ultra Magnum, Wyatt STD Magnum or Wyatt Ultra Magnum style magazines. Action is 22.1 cm long, while the head diameter is 3.4 cm. It weights 595, 822 or 953 g. Borden Timberline model is chambered in caliber .30 – 06 SPRG. Rifle is manufactured both for right and left hand users. This model has four holes for the mounting purposes. Two in front and two at the back of the receiver.
For a more thorough and complete overview click below:
The Picatinny rail is on a good way of becoming a global standard for mounting since it was invented in 1995. Developed on the Weaver template, the biggest advantage of the Picatinny rail is the usage across its entire length, unlike Weaver which has predesignated slots for mounting, limiting its usability and versatility. Ease of use and interchangeability are also its assets. Picatinny has slots evenly placed, namely exactly 5.23 mm one from the other and 3 mm deep. Because of this, the mounting is identical on all firearms using the Picatinny standard. Picatinny rails are usually available with 0 MOA or 20 MOA inclinations.Picatinny rail can accommodate all types of mounts, also those designed for Weaver standard. Full size mounts of this type are designed for mounting of modern optics for example thermal or digital.
Scroll down to products