Blast Hose Nozzle Holder NH Fittings
Nozzle holder for blast hose
- Connects the blast nozzle to the blast hose
- Choose your blast nozzle thread type;
- 3/4″ Medium Mitey-Mite Thread
- 1-1/4″ Industrial Fine Thread
- 2″ Coarse Contractor Thread *Contractor Favorite*
- Reference the table below for the size to fit your blast hose
- Available in Nylon, Brass or Aluminium
- Sold Individually
Bulk Discounts Available
Categories: All Products, Blasting, Replacement Item, Sandblasting Hoses & DuctingTags: aluminium, blast, brass, coars, contractor, fit, fittings, holder, hose, industrial, medium, nh, nozzle, nylon, size
BlastOne nozzle holders are available in a variety of materials including brass, nylon and aluminum. Nozzle holders are available in both fine (NPSM) and coarse (Contractor) thread. Use only undercut screws to attach to blast hose. Contact BlastOne for instructions on correct fitting of nozzle holders. BlastOne nozzle holders are installed on the end of blast hose using an external friction fit with sealant and short screws. Screws are to penetrate the out side wall of the hose only. Screws penetrating the inner wall of the hose will cause premature hose failure.
|Part Number||Image||Qty 0 - 7||Qty 8 or more|
C1 Nozzle Holder for Sandblaster Gun Sandblasting Sandblast Kennametal Nozzle
$26.99Buy It Now26d 4h, $8.98 Shipping, eBay Money Back Guarantee
Seller:jlz01✉️(5,852)100%, Location:Ionia, Iowa, Ships to: Worldwide, Item:221824468038C1 Nozzle Holder for Sandblaster Gun Sandblasting Sandblast Kennametal Nozzle. Sandblast nozzle holder & ceramic nozzle Whether you are building your own pressurized sandblaster from scratch or upgrading that Harbor Freight or other brand pressurized sandblaster, you need one of these! This is a brand new sandblaster nozzle holder that uses the large (3-3/4" long) ceramic C1 nozzles. This is for the nozzle holder and one nozzle only. See my other listings for additional replacement nozzles. Whether you are building your own blaster or are looking for a replacement nozzle holder assembly, you won't be disappointed with this design. Includes:Large Size Kennametal Heavy Duty NozzleThe high quality alumina oxide ceramic and its larger size allows more material for a longer lasting nozzle Outperform smaller ceramic nozzles many times overKennametal nozzle sizes include3/32" orifice requires 1-6 CFM1/8" orifice requires 7-21 CFM3/16" orifice requires 22-45 CFM1/4" orifice requires 46-80 CFM Large Heavy Duty Nozzle HolderEngineered and machined all Steel Nozzle HolderLarge Hex nut is easy to turn & provides easy removal to change out nozzles as neededAccepts Kennametal nozzles as well as off-brand nozzles. (The off-brand nozzles are usually a little smaller on the large end) Here are a few feedbacks: The sandblaster nozzle works awesome!!!,Thank You very much!!!! Great service, Great product, Great E-Bay seller, Thank youCondition:New, All returns accepted:ReturnsNotAccepted, Type:Sandblaster, MPN:Does Not Apply, Set Includes:Sandblasting Gun, Brand:ZELLC
PicClick Insights - C1 Nozzle Holder for Sandblaster Gun Sandblasting Sandblast Kennametal Nozzle PicClick Exclusive
- Popularity - 24,275 views, 10.6 views per day, 2,289 days on eBay. Super high amount of views. 76 sold, 64 available.
- Price -
- Seller - 5,852+ items sold. 0% negative feedback. Top-Rated Seller! Ships on time with tracking, 0 problems with past sales.
24,275 views, 10.6 views per day, 2,289 days on eBay. Super high amount of views. 76 sold, 64 available.
5,852+ items sold. 0% negative feedback. Top-Rated Seller! Ships on time with tracking, 0 problems with past sales.
People Also Loved PicClick Exclusive
Nozzle holders attach to the end of a blast hose and hold the blasting nozzle. During operation, the air pressure inside the blast hose helps hold the nozzle holder securely in place. To attach the nozzle holder, the blast hose must be cut squarely and cleanly, and the holder must be installed using the screws provided. When installing, the screws should penetrate the outer wall but not the inner wall of the blast hose.
Clemco nozzle holders are available in aluminum and fiber-reinforced nylon. Nylon nozzle holders are also available with both standard and contractor mounting threads. Contractor threads are a Clemco-exclusive design: they offer larger threads that help prevent abrasive buildup and allow for easy assembly/removal.
Refine by subcategory:
1" ID x 1-1/2" OD1" ID x 1-7/8" OD1-1/2" ID x 2-3/8" OD1-1/4" ID x 1-7/8" OD1-1/4" ID x 2-3/32" OD1/2" ID x 1-3/16" OD3/4" ID x 1-1/2" OD3/4" ID x 1-5/16" OD
Holder sandblasting nozzle
.Clemco Nozzles Overview - Sandblasting Machines
You will also be interested:
- Phone boom arm
- 1982 hindi movies
- Rose wreath svg
- Shadowlands season 2 release
- Kayak at walmart
- Psycopg2 timeout
- Shot down song
- Regional director of nursing salary
- New girl episode 7
- Eyes roll porn
- D100 game