Hq sixteen stitch regulator

Hq sixteen stitch regulator DEFAULT

Hq sixteen stitch regulator

Designed for use with the HQ Sweet Sixteen sit-down longarm quilting machine. This innovative stitch-regulation system is the best way to ensure your stitches are even as it regulates the stitch length automatically, regardless of your sewing speed. Poles come standard with Velcro for leader attachment. Sep 08, 2013 · I had very good luck with my hq 16 with Stitch regulator on a frame. Consistent, even stitches are in the palm of your hand when you use the Baby Lock TruStitch Stitch Regulator. 14. PRODUCT SOLD OUT. purchased in 2004 All updates as needed. Sep 09, 2016 · It has the much the Same interface as the sweet 16 except with stitch regulator of the larger long arms on board no add on or after thought. Handi Quilter INFINITY 26" Long Arm with Gallery2 Frame QuiltMotion Quilter's Creative Touch 5 Beginnings 765. All others choose FREE shipping if over . Handi Quilter Sweet sixteen machine and sit-down table (30x36), Great for free motion quilting, HQ Stitch Regulator, has touch screen controls, with Customized Speed Control with built-in Stitch controls, Very Low stitch count(000223750) as it has little usage. Juki® TL-98E™. ,500. Perfect for all free-motion quilters from beginning to advanced. It uses patent-pending technology to track your sewing motion and regulate the stitch length as you move the fabric around the table. I am relatively new to quilting and the HQ Sweet Sixteen looks like it we be very nice for FMQ. Moving the machine is your responsibility. HQ TRU-STITCH REGULATOR FOR SWEET SIXTEEN Out of Stock : Contact Us Phone: (541) 383-1999. Willing to ship but Dec 05, 2014 · Having the machine perpendicular to the traditional domestic set-up was a little disorienting to me, as was the stitch regulator. Free-motion quilting was never easier, and your stitches will be PERFECT with the HQ InSight™ Table with built-in stitch regulation. The computerized Tru Stitch regulator measures movements on the worktable and guarantees even stitches while creating freehand designs. Includes the HQ InSight Table with a customized insert for the HQ Sweet Sixteen stationary longarm machine. Innovative new stitch-regulation system that measures your movements for choreographed stitch-regulation. Just tuned. Stitch regulator: Many of the home sewing machines lack stitch regulators which leads to an uneven stitch. Handi Quilter. If… * Optional accessories available (Stitch Regulator upgrade should be installed by your local HQ Representative) Heavy duty, portable frame constructed out of metal designed specifically for the HQ Sixteen Quilting Machine. Handi Quilter Amara. The Stitch Regulator can be installed by your authorized HQ Representative. 5 1/2 NPT Female Thread 2. Features Aug 14, 2021 · HQ TruStitch Stitch Regulator w/HQ Sweet Sixteen Table Overlay. Machine shipping . Comes in king size length, but can still collapse to smaller sizes. ) Description. Check with your local retailer. Before long you'll have the free-motion confidence you've always wanted! HQ Sweet Sixteen sewing machine - ,500 (Clinton) HQ Sweet Sixteen sewing machine. I would expect that it would immediately stop. com. I can't adjust the sizes with my sewing speed. with built-in stitch regulation! Imagine yourself quilting up to 2,200 stitches per minute, easily manipulating your bed-sized quilt within the roomy 18" throat space. The TruStitch™ stitch regulator is designed to turn the PLATINUM™ 16 machine into a stitch-regulated quilting machine. 0044 702 S. This one is also perpendicular like the HQ, ad has 16″ throat space. I've never had a problem before. I'm only selling it because I upgraded to a quilting frame. Handi Quilter is excited to introduce their innovative new stitch-regulation system designed especially for your HQ Sweet Sixteen. They adjust the needle speed to produce even stitches. 0. May 04, 2019 · Simply Sixteen by Handi Quilter Does anyone have an opinion on this machine? I've been quilting on a 9" throat Pfaff Hobby Grand Quilter/Inspira Frame for almost 15 years and have loved every stitch it has sewn and believe me it has sewn many, but I went to a dealer yesterday to have my machines serviced and low and behold the floor model of Jul 24, 2021 · Best Sit-Down with Stitch Regulator: Handi Quilter Sweet Sixteen Long Arm Quilting Machine “TruStitch regulator, responsive foot pedal, 30 inches x 36 inches table, interchangeable Handi feet. Review the DVD and these instructions to better understand how to setup and use the HQ Sixteen™. IntelliQuilter is the new standard in computerized quilting for longarm quilting. Apr 01, 2013 · Handi Quilter HQ Sixteen Stitch-regulated Quilting Machine and HQ Studio Frame Package by Handi Quilter Quilting Machines. MSRP Price Brand New w/ Stitch Regulator - ,995. Walking stitch plus five basting stitch options. MSRP: 10,999. It is the same build quality as larger HQ. This is a handiquilter sweet sixteen for sale. Does Sweet Sixteen have a stitch regulator? Introducing the most technologically advanced way to sit-down free motion quilt with stitch-regulation! Handi Quilter’s HQ Sweet Sixteen is simply the best way for quilters to tackle projects with a sit-down machine. Quilting Machine Features • Stitch regulation provides you consistent stitch quality from 4 stitches per inch up to 15 stitches per inch. (Bonuses: Ruler Base, Straight Ruler, Versa Tool, five cones of Quilter's Choice Thread, and the HQ Instructional DVD Set (7 dvds). Please consider this Handi Quilter 16 Sit Down Machine with a 16" throat as a solution! I purchased it new in November 2007. TruStitch Stitch Regulator with Overlay. It has the stitch regulator, ruler base, Micro handles, rear handles and laser light, bobbin winder, low stitch count (1,234,178), The frame can be set up in 10 or 12 ft. It is possible that you might need to purchase a different kit if your current machine doesn’t have a P3-pod. I have a HQ Sixteen (model before the Sweet Sixteen) and considered getting the stitch regulator. Yamaha YZ450F 450cc, New HQ Powersports Front Wheel Bearings Fit Yamaha YZ450F 2003-2013: Automotive, Yamaha YZ450F 450cc, -Kit includes 2 bearings and 2 seals needed to repair 1 wheel, OEM Part Numbers:, Applications:, Buy New HQ Powersports Front Wheel Bearings Fit Yamaha YZ450F 2003-2013: Bearings - FREE DELIVERY possible on eligible purchases, New Aftermarket Part, -Bearings feature triple Buy HQ New Upgraded Light Sensitive Smart Universal LED Welcome Car Door Light IR Sensor, AAA Battery Operated, Ghost Shadow Light, Welcome Courtesy Lamp car Door Light Compatible with Nissan (2 Pcs): Lighting - FREE DELIVERY possible on eligible purchases,New Fashions Have Landed,wholesale prices,24/7 friendly Customer Service,Online watch shopping,the best shopping experience that you deserve! 51vv久爱在线观看 51vv久爱无删减 琪琪看片网 51vv久爱在线观看 51vv久爱无删减 琪琪看片网 ,sebo1在线观看 sebo1无删减 琪琪看片 The TruStitch™ stitch regulator is designed to turn the PLATINUM™ 16 machine into a stitch-regulated quilting machine. With the introduction of TruStitch, quilters are now able to create quilt designs with beautifully even stitches! If you love free-motion quilting but struggle to fit your project on a domestic machine, you’re going to love the HQ Sweet Sixteen. Smaller bobbin size when using domestic machine. Handi Quilter TruStitch Stitch Regulator for the Sweet Sixteen Sitdown: Handi Quilter is excited to introduce their innovative new stitch-regulation system designed especially for your HQ Sweet Sixteen. HQ Series 2. May 19, 2020 · Handi Quilter 16 for auction. The TruStitch™ stitch regulator is designed to turn the PFAFF® powerquilter™ 16. Mar 06, 2014 · Meet the new addition to my craft room It is a sit down quilting machine, a Baby Lock Tiara which is basically the same thing as the Handi Quilter Sweet Sixteen. TruStitch is perfect for free-motion quilters of all levels from beginning to advanced. It has had limited use because I worked full time and did not have the time to do much quilting. handi quilter sweet sixteen plus with tru-stitch stich regulation and overlay excellent condition, all the latest upgrades. MSRP Price Brand New - ,595. It plugs directly into your sewing machine’s foot pedal port. Excellent Condition. Sold as a package with the HQ Sixteen Quilting Machine. Sep 27, 2018 · HQ 16 with the Pro-Stitcher. SWEET SIXTEEN WITH TRU-STITCH. The Q 16 is equipped with the BERNINA Stitch Regulator which makes freehand quilting easier than ever. Innovative stitch-regulation system for the HQ Sweet Sixteen that measures controller movements on the table surface for choreographed stitch-regulation. Experience quality, percision, and a world of quilting possibilities. Good quality sit down quilting machines come with stitch regulators. Jan 05, 2017 · Handi Quilter Sweet 16 Review I've had my Handi Quilter Sweet 16 (I call her Chloe) since July, so almost 6 months, and in that time I've quilted several lap quilts and several runners on her. Email to friends Share on Facebook - opens in a new window or tab Share on Twitter - opens in a new window or tab Share on Pinterest - opens in a new window or tab TruStitch Stitch Regulator for Handi Quilter Sweet 16 Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube. From baby quilts to king-size, the HQ Amara is the perfect fit for your style of quilting. It sews a beautiful stitch and was made to quilt! It comes with the following: HQ Capri Stationary Longarm Quilting Machine with HQ InSight stitch regulation. Quilters are now able to create quilt designs with beautifully even stitches. The Pro-stitcher has the lastest update, asking ,000, OBO. Price: $ 6,495. (In stock machines only) HANDI QUILTER. Introducing the most technologically advanced way to sit-down free motion quilt with stitch-regulation. . Call Brianda at 828-349-9160 or email to [email protected] 00. Machine has approximately 275,000 stitches. 8 Length 1. 6 Diameter 1. Machines with the P3-pod will have a dot of white paint in that area. The quilting area is the size of a domestic machine and shrinks as the quilt advances. 8 - 1 ¼ inch bolts (2 left over if installing on stitch regulated machine) 2 - 1 ½ inch bolts (left over if no stitch regulator) 2 - ¼-20 Lock nut (left over if no stitch regulator) TERMINOLOGY Sliding hub wheel – wheel that comes with tape on the center (remove) that has a sliding center sleeve HQ Sweet Sixteen Top Features. Y: The HQ Sixteen Stitch Regulator keeps your stitches even and consistent so you can concentrate on your creativity rather than the mechanics of keeping your stitches uniform. Tulsa. May 07, 2021 · The BSR adjusts to regulate the stitch length. This class will cover the TruStitch parts, touch screen settings, and other basics. ” Best for Beginners: Juki TL-2200 Quilt Virtuoso Pro Long Arm Quilting Machine Feb 24, 2021 · Does Juki have a stitch regulator? No it does not have a stitch regulator. 5 in stock. Visit our website for quilt Handi Quilter Simply 16. ADJUSTABLE STUDIO FRAME. Designed specifically to use with the HQ Sweet Sixteen sit-down longarm quilting machine, it is easy to learn how to use and operate the system. Brand new stitch regulator. Reviewed in the United States on December 7, 2014. Asking price is 3. 16 inches of throat space and eight inches of vertical space. use the included hardware to permanently install your. Most longarm and midarm quilting machines on the market today offer a built-in stitch regulator. Attached Regulators. Features And Benefits. (NOTE: compatible with HQ Sweet Sixteen machines that are TruStitch-ready. Stitches Per Inch 4-18. Heavy duty, portable frame constructed out of metal designed specifically for the HQ Sixteen Quilting Machine. Oct 29, 2012 · HQ Sixteen Quilting Machine with Stitch Regulator and Pro-Stitcher, Front and Rear Handles, Laser Stylus, External Bobbin Winder, Zipper Leaders and many accessories. HQ Wave C Template. Precision Quilting. Large work space – The HQ16 gets its name from the sixteen-inch throat depth. Sale Price: ,895. Product Details. It sews a beautiful stitch and was made to quilt! It comes with the following: Handi Quilter TruStitch Regulator. 00 R. HQ Sweet Sixteen 16", Sit Down Model With TRU-Stitch, Stitch Regulator Call for Sale Price HERE ARE THE DETAILS: HQ SIXTEEN BY HANDI QUILTER, BOUGHT IN 2009. Stitch regulator – keeps your stitches even with consistent stitch quality. Do the HQ 16's all have stitch regulators? If it's a later update, what year did they start adding them to this model? I am interested in an HQ16 (serial # HZ083553308) in another state and the seller is unsure whether the machine has one. Feb 29, 2016 · I appreciate you taking the time to write this post. Complete Creativity. QR Code Link to This Post. 5. hq sweet sixteen with optional stitch regulation If you love to free-motion machine quilt but struggle to fit your project in a small throat space, you are going to love the HQ Sweet Sixteen. Easy to learn how to use and operate the system. Sixteen inches of throat space gives you room to quilt even a king-size quilt. We just know … Continue reading Handi Quilter Infinity 26″ is a superior longarm machine and quilting System that includes a built-in stitch regulator perfect for free-motion quilting and use with all accessories such as optional rulers, accessory feet and Pro-stitcher automation. Handi Quilter’s HQ Sweet Sixteen is simply the best way for quilters to tackle large quilting projects with a longarm sit-down machine. -. Join us for some quilting tips and score major savings on our new peoducts. Throat Space - 16 Inches. Works Great! I bought a bigger machine and don't need 2. Sweet 16 Large Foot Controller. Saved by Connie Griner HQ Sweet Sixteen HQ Capri 18 HQ Simply Sixteen HQ Amara 20 HQ Forte 24 Be the first to review “HQ TruStitch Stitch Regulator” Cancel reply. Jan 02, 2013 · January 2, 2013, 04:00 PM. Low stitch count. (Clinton) HQ Sweet Sixteen quilting machine complete with table, bobbin winder, stitch regulator, many other accessories. As is. Everything you need for free motion quilting right out of the box. Includes white plastic overlay that attaches to the HQ Sweet Sixteen tabletop to create a continuous surface for use with the TruStitch™ stitch regulator. Includes table and Frame, New leaders , stitch regulator, HQ ruler base, panograph stylus w/light, and much more. The HQ InSight stitch regulator takes away the fear of finishing. 5″ to 39. One problem that I am having is that when operating in regulated mode, when I push the stop button, it frequently keeps stitching. Imagine yourself quilting up to 2,200 stitches per minute, easily manipulating your bed-sized quilt within the roomy 18" throat space. I have been considering a Handi Quilter Sweet Sixteen mid arm sit down machine and wondered if anyone has it and can tell me if they like it or not and if they would recommend it. $ 7,995. R 380. com; Address: 1245 SE 3rd Street Suite B-1 Bend, OR 97702 This is a HQ 16 (16 inch throat) machine on a 10 foot Studio table / frame with the ProStitcher computerized system. About Sewingmachinesplus. Now the stitches are various sizes, largest about 1/4" long. , Lots of extras . It sews a beautiful stitch and was made to quilt! It comes with the following: Package includes: HQ Sixteen Quilting Machine with Stitch Regulator, Front and Rear Handles, Laser Stylus, External Bobbin Winder and Portable Professional Frame * Optional accessories available. 5″. Handi Quilter 16 long arm quilting machine on 10 foot HQ frame Stitch Regulator, Automatic Needle Positioning, Rear Controls Instruction manual, 5 pantagraphs. The Handi Quilter Simply 16 is ground-breakingly simple to use, even for a beginner! The smaller frame means that it will fit into your sewing room, the built-in stitch regulator makes quilting stress-free for even for the complete novice, and the 16″ machine is powerful but not too heavy to drive. It has cruise and precise - you can set cruise speed, ants set speed in manual mode. It is a stitch regulator that is available for many brands of machine, many types and many size arms machines. Integrated stitch regulation makes your stitches uniform and easy to FINISH YOUR QUILTS! Paired with the exclusive HQ Tru-Stitch Stitch Regulation. Located in Ohio. HQ Simply Sixteen - 10' Studio2 Frame with HQ Precision-Glide Track (8 stitch regulator is designed to turn the . To verify that the problem is related to your stitch regulator and is not a timing issue, try your machine in the manual sewing mode. $ 341. Description. The large foot control for the Sweet 16 will make sure you never lose track of it. Adjustable table height from 25. Includes white plastic overlay that attaches to the HQ Sweet Sixteen tabletop to create a continuous An optional TruStitch™ module is also available for consistent stitch regulation. Comes with the Tru Stitch Regulator, foot pedal, HQ Bobbin Winder, adjustable height table, bobbins, limited threads, vertical spool holder and user manuals. Smooth table surface assures even quilting TruStitch Stitch Regulator. Even stitches every time. HQ Sixteen™ Stitch Regulator Installation—For Stitch Regulated Machines Only (Skip to page 6 for non-stitch regulated machines. Aug 25, 2021 · Handi Quilter Avante 18” Long Arm Quilting Machine. Handi Quilter’s HQ Sweet Sixteen 16″ Longarm w/ Table & TruStitch Regulator is simply the best way for quilters to tackle projects with a sit-down machine. 16. I really, really enjoy using her, and overall she is a joy to use, but it took a little bit of getting to know her before I was consistently happy with HQ Sixteen Stitch Regulator Upgrade Kit, Handlebars, and P-pod. HQ Sweet Sixteen | Quilting, Sewing Machine, TruStitch Stitch Regulator . You can also check the power plug socket. Include Upgrade the stitch regulation on your HQ Sweet Sixteen by adding the HQ InSight Table with built-in InSight stitch regulation. I bought a used HQ Sixteen and I'm working daily to increase my skill level. PRICE: MSRP - ,495. It comes with the Tru-Stitch Stitch Regulator. $ 5,595. Paired with the exclusive HQ InSight TableTM with built-in HQ InSight Stitch RegulationTM. I am doing ruler work. Dimensions 14" w x 20" h x 26" l. Red Rooster Quilts is a Stocking Dealer for Handi Quilter. TruStitch The TruStitch stitch regulator can make both small and large stitches between 4 and 18 SPI. HQ Sweet Sixteen with Tru Stitch Package purchased in 2015 from reputable dealer. Karlee Porter from Handi Quilter explains the advantages of working with the TruStitch Stitch Regulation System on HQ Sweet Sixteen sit-down longarm. The small controller easily attaches to your fabric and communicates with the AQSD-16 as you free motion quilt. Which means not only do we offer complete sales, service and training on the complete Handi Quilter line of products we also have them available for IMMEDIATE pick up on the Amara 20" Longarm, the Sweet 16 Sitdown Longarm version with the TruStitch Stitch Regulator. 14-Automatic buttonhole Introducing the most technologically advanced way to sit-down free motion quilt with stitch-regulation. 452. 0 out of 5 stars but this one works perfectly with my HQ Sweet Sixteen stitch regulator. Choose from 4-22 stitches per inch for all types of quilting motifs. Handi Quilter Sweet Sixteen Sit-Down Table. HELP NEEDED - Jody Beitzel asked "My HQ 16's stitch regulator is acting strangely. Handi Quilter Sweet Options/Add-Ons (not included): HQ Hideaway™ Table, 18"x 30" table extensions, Table Overlay, Handi Feet, Horizontal Spool Pin *Actual dimensions of table; please allow space in front, back, and on at least one side for walking and standing. Two modes of stitch regulation: Precision or Cruise. Feb 04, 2014 · The Handi Quilter Sweet Sixteen is not at all noisy and there is virtually no vibration whatsoever. HQ Sixteen stitch regulator and stop. Handi quilter sweet 16 w/stitch regulator - ,100 (Princeville) < image 1 of 10 > condition: like new make / manufacturer: Handi quilter. To see if you have the pod look for a P3 sticker underneath the thread platform. Handi Quilter HQ HQ Sweet Sixteen Package Long Arm Quilting Machine, Table, Stitch Regulator, and More. SKU: QM20172 Categories: Handi Quilter Longarm Quilting Systems, HQ Upgrades, Long Arm Quilting Accessories Tag: Handi Quilter. I purchased it on Monday and have had so much fun playing with it for the last few days. 6 Diameter 5075 PSI Max Working Pressure 1. Basting Stitch - 5 Different options. com, Inc. What to consider when you buy HQ16* - equipped with stitch regulator HQ Simply Sixteen** (coming soon) Handiquilter 18/Avante, 24/Fusion Hobby 1200 Grandquilter by Pfaff Janome 1600, 6500, 6600 Janome Artistic Quilter 18, 26 Janome Artistic Quilter 18-8DX** Janome Artistic Quilter 26-8DX** Juki TL98E, TL98Q, TL98QE Juki 2000 series Juki QVP* The BERNINA Stitch Regulator guarantees precise stitch quality and results at any speed during free-motion quilting. 6 ID Carbon Steel 1/2 NPT Female Thread Holmbury HQ12-M-08N Flat Face Nipple Male 0. For example, both my Q20 sit-down BERNINA and my Q24 Longarm on The Quilter’s Cruise Control ®, proudly made in the USA, is a stitch length regulator for use with many short-arm quilting frames. Speed – You set the speed, and you can move along at 100 to 1500 stitches per minute. Channel locks – which make perfectly straight lines across a quilt – aren’t available. Introducing the most technologically advanced way to sit-down free motion quilt with stitch-regulation! Handi Quilter’s HQ Sweet Sixteen 16″ Longarm w/ Table & TruStitch Regulator is simply the best way for quilters to tackle projects with a sit-down machine. I am very intrigued with the table and wonder if it would be worth the dollars to switch tables just for the regulator. They are in good condition comes from a smoke free home. If it skips stitches in BOTH modes, then start by checking the timing on your machine. With the introduction of TruStitch™, quilters are now able to create quilt designs with beautifully even stitches. 6 Page 4 HQ Sixteen™ Stitch Regulator Installation— For Stitch Regulated Machines Only (Skip to page 6 for non-stitch regulated machines. Thanks for your input. SKU: QM00130-0101. It also stitches teeny tiny ones. It works with all Handi Quilter stitch-regulated quilting machines: HQ Sixteen, HQ Simply Sixteen, HQ Avanté, HQ Fusion, HQ Amara, HQ Forte and HQ Infinity. Finally, I tried out the Pfaff Powerquilter 16. Now you will be able to enjoy any quilting project with the benefit of our TruStitch full visibility stitch-regulation. HQ Simply Sixteen HQ Amara 20 HQ Forte 24 HQ Infinity 26 HQ TruStitch Stitch Regulator. Stitch Regulator Type - TruStitch Stitch Regulator. machine into a stitch-regulated quilting machine. This is our floor model Sweet Sixteen and barely used. May 25, 2014 · This problem deals with long inconsistent stitches with the chosen stitch length--not skipped stitches. July 21, 2020 ·. Quantity: Innovative stitch-regulation system for the HQ Sweet Sixteen that measures controller movements on the table surface for choreographed stitch-regulation. Handi Quilter Australia. TruStitch Basics for Baby Lock. Maximum Control. This package includes TruStitch Stitch Regulator! Full 16” of throat depth provides more than 3 times the quilting space of domestic sewing machines, with over 8” of vertical space. For a long time I wanted to get a Bernina with a BSR. This machine has M-sized bobbins. Runs quietly and very smooth stitching. Sew Ezi Additional Perspex Insert. located in Redfield Sd . Sep 02, 2009 · HQ Sixteen Quilting Machine with Stitch Regulator, Front and Rear Handles, Laser Stylus, External Bobbin Winder and Portable Professional Frame. Was recently serviced. ) Directional Conventions: Orient yourself to the machine as if you were standing behind the machine facing the Hand Wheel; User Right and User Left, then Machine Aug 25, 2021 · Handi quilter hq sweet sixteen long arm quilting machine with stitch regulator. I cleaned the tracks, any advice?" This is the original set-up video included with the HQ Sixteen longarm machine. Verified Purchase. Any info would be very helpful. PFAFF ® powerquilter ™ 16. "We are a family owned company and have been involved in the sewing and vacuum business for over 40 years. HQ Bobbin winder, Extra needles and Bobbins. We just know that you will love this companion for your HQ Sweet Sixteen. The HQ Amara 20-inch longarm machine with HQ Studio2 Frame (choose from 10-foot or 12-foot). USED. We are here to let you know that we are the manufacturer of the "Quilter’s Cruise Control® ". This kit is an upgrade for machines that already have a P3-pod on the machine. The IntelliQuilter computerized quilting machine system is an after-market add-on that fits A1, APQS, Bernina, Gammill, HandiQuilter, Kenquilt, and Nolting longarm quilting machines. At the show this week there are many quilters that would like stitch regulation for their machines. Included are – stitch length regulator, interchangeable foot mount, Handi Glide foot, tension kit, ruler base, Groovy board stylus and adapter, extra set of cloth leaders, manuals and more. Easy Set Tension. 1 1/8 inch poles rigid enough to hold large quilts. July 17, 2013 ·. We just know … Continue reading "HQ Aug 21, 2010 · Stitch Regulators. 5 Zinc Nickel Plated HQ Sweet Sixteen sewing machine - ,500 (Clinton) HQ Sweet Sixteen sewing machine. Handi Quilter’s HQ Sweet Sixteen is simply the best way for quilters to tackle projects with a sit-down machine. Add stitch regulation to your HQ Sixteen. 18. Safety Section TruStitch Regulator Components Pre-installation Instructions Installation Instructions Indicator LED Identification Activating Stitch Regulation Machine Operation Using the Stitch Regulator TruStitch Accessories Tips and Techniques Limited Warranty Coverage Recommended for Use with the HQ Sweet Sixteen and TruStitch 2 www Jun 27, 2021 · I am using a HQ Sweet 16 with the Tru Stitch (manual) stitch regulator. do NOT contact me with unsolicited services or offers Handi Quilter Sweet Sixteen Sit-Down Quilting Machine - ,500 (Tallahassee) Very nice and well maintained HQ Sweet Sixteen Sit-Down Quilting Machine with many upgrades. Email: [email protected] Reed Rd, Kokomo, IN 46901 5. handiquilter makes a wonderful machine. 0 machine into a stitch-regulated quilting machine. Manual Mode - 3 Presets. The HQ Capri is a BIG machine for SMALL spaces. 6 ID 0. This machine works great. HQ Sixteen™ User Manual 1. ALSO INCLUDES A HANDI BOBBIN WINDER WITH EXTRA BOBBINS. Jul 21, 2020 · InSight table & stitch regulator now available for Sweet Sixteen! Handi Quilter. Built-in v. Note: A Handi Quilter “Welcome” DVD is included with your HQ Sixteen™ Machine. Details: handi, quilter, avante, long, quilting, machine, frame, hardly, touch, screen. bring help to load The optional TruStitch is a stitch-regulation system,which measures your movements to achieve consistently even stitch lengths, regardless of stitching speed. It includes double-stick tape for permanent installation on the table. It keeps stitches even and consistent regardless of how slow or fast you quilt and no matter how complex your quilt design may be. INCLUDES THE SEWING MACHINE WITH 16 INCH THROAT WITH STITCH REGULATOR, FRONT AND REAR MENU DISPLAY IN FRONT AND REAR MOUNT HANDLES, 12 FT. Package includes: HQ Sixteen Quilting Machine with Stitch Regulator, Front and Rear Handles, Laser Stylus, External Bobbin Winder and HQ Studio Frame for HQ Sixteen, 11 foot HQ Marked Leaders Heavy duty, portable frame constructed out of metal designed specifically for the HQ Capri. Handi Quilter Sweet Sixteen. (Well, almost!) Longarm and Midarm quilting machines have built-in regulators. Call 888-224-9912 or email for more info. Upgrade the stitch regulation on your HQ Sweet Sixteen by adding the HQ InSight Table with built-in InSight stitch regulation. 00 – $ 6,695. I had it in between two bigger longarms, one 26 inch longarm and then went back to a 30" gammill with statler that I used for customer quilting as a business The stitches on the HQ are excellent. The large bobbin is great. Introducing the InSight table upgrade for Sweet Sixteen owners! Also some new accesories are now available for for the InSight table: a Drawer and Casters. HQ Sweet Sixteen 16" Stationary with InSight Stitch Regulation Table. With the introduction of TruStitch, quilters are now able to create quilt designs with beautifully even stitches. High-speed rotary hook with large-capacity M-class bobbin. Other information. My stitches were awful!! As you stated, there is a major learning curve. 00 RRP. The HQ Capri includes lots of light, so you Handi Quilter Sweet Sixteen Table Overlay This white plastic overlay attaches to the HQ Sweet Sixteen tabletop to create a continuous surface for use with the TruStitch™ stitch regulator. 18" Longarm Quilting Machine for SIT-DOWN USE. About 5 years old was professional serviced and read No stitch regulation which is a 0-ish optional accessory. I sat down with one last Oct and I left that shop so frustrated. Also comes with bobbin winder & extra M Class bobbin cases. TruStitch™ Warranty information. You get regular even stitches on bends, designs, circles, and corners of a quilt

Sours: http://gosoil.biz/khrq

to download HQ Sixteen user manual - Handi Quilter

(v. 1.6)

User Manual

Copyright© 2007 “All Rights Reserved”

No part of this manual may be reproduced in whole or part without

express written consent from HandiQuilter, LLC

R


Contents

Safety Section and Quick Facts...………………………………………………….....1

Package Contents and Machine Components……………………………...…….2-3

Stitch Regulator Installation………………………………………………………....4-5

Installation Procedures……………………………………………………………….6-9

Laser Style Safety and Use Guidelines.…………………………..……………..…...9

Threading the Machine.………………………………………………………….……10

Bobbin and Thread Tension Adjustments……………………………..……………12

Maintenance……………………………………………………………………………13

Using the Handles and Menu Screens…………………………….………………..14

Stitch Regulator Operation……………………………………………………………17

Thread and Quilting Recommendations…………................................................18

Troubleshooting..……………………………………………………………..……19-21


Safety Section

Please note: Do not operate your HQSixteen quilting machine until you have completely read the information

contained in this manual. Please keep all packaging and order information for warranty purposes.

1. Always unplug the HQSixteen from the electrical outlet when performing any maintenance, changing the

needle, removing thread locks, or when left unattended.

2. Keep fingers away from all moving parts. Use caution around the needle or sharp external components.

3. Change the needle often. Do not use bent or dull needles.

4. Switch the power off when making any adjustments in the needle or bobbin area, such as threading the

needle, installing the bobbin case, or when oiling or cleaning.

5. Never drop or insert foreign objects into any opening.

6. The HQSixteen should only be used indoors away from moisture.

7. The HQSixteen should not be stored or used in extreme temperatures.

8. Use the HQSixteen only for its intended use as described in this manual.

9. Use only attachments recommended by the manufacturer in this manual.

10. To disconnect from the wall outlet, push the switch to the off position, then remove the plug from outlet pulling

from the plug, not the cord. Never operate the HQSixteen if the cord is damaged or not working correctly.

If a mechanical or electrical problem is encountered, return the HQSixteento the nearest authorized

service center or the manufacturer for examination, repair, electrical or mechanical adjustment.

11. It is not recommended that the HQSixteen Quilting Machine be used with any home machine quilting frame

other than those recommended or manufactured by HandiQuilter LLC.

Quick Facts

Description Specification

Sewing Speed Approximately 1,500 spm

Minimum Sewing Speed 150 spm

Needle Bar Stroke 35.3 mm

Sewing Foot Stroke/Lift 5 mm

Needle System 135x7 Standard 134 R Long Scarf

Needle Sizes 14/90 – 19/120

Lubricating Oil & Greases Kluber Lubrication

Dimensions of Sewing Machine Throat 8.25” x 16.00”

Rate Voltage/Power Consumption 120 volts, 60 Hz 100 watts

Power Consumption of LED Lights 20 watts

Hook System Custom Manufactured, Rotary, Large Bobbin

Bobbin Type Class M

Motor Type Brushless DC, Internal Encoding

Automatic Needle Positioning Up and down, full stitch and half stitch

Disclaimer

HandiQuilter LLC and its Representatives are in no way legally responsible or liable for

damage to the HQSixteen when used improperly or not in accordance with the

guidelines stated in this manual or when used on Home Machine Quilting Frames not

recommended by HandiQuilter LLC.

Home Machine Quilting Frame Recommendations

HandiQuilter Original Home Machine Quilting Frame

HQ II Home Machine Quilting Frame

HQ Portable Professional Home Machine Quilting Frame

HQSixteen User Manual 1.6 Page 1


Front Side

Diagram A

1. Thread Mast

2. Thread Guide A

3. Three Hole Thread

Guide B

4. Thread Guide C

5. Tension Assembly

6. “Stirrup” Thread Guide D

7. Take Up Lever

8. Thread Guide E

9. Needle Bar Thread

Guide

10. Needle

11. Front Casing/Frame

12. Hand Wheel

13. Menu Settings Display

14. Side Laser Stylus Post

Hole

Package Contents

Please keep your original box and packaging

Contents of Package

1. Bobbins (5 pieces)

2. Needle (135x5) size 16

3. Needle (135x5) size 18

4. Bobbin Case

5. Thread Mast

6. Oiler

7. Power Cord

8. Hex Wrench (2 – for needle

clamp & handlebars)

9. Instructional DVD

10. Instruction Manual

11. HQSixteen Quilting Machine

HQSixteen Components

Optional Accessories

1. Front Handles

2. Rear Handles

3. Laser Stylus and Clamp

4. Laser Stylus Post

Diagram A

HQSixteen User Manual 1.6 Page 2


Back Side

Diagram B

15. Hopping Foot

16. Needle Bar

17. Presser Bar

18. Back Casing/Frame

19. Front Handle Serial Port

Connector

20. Top Laser Stylus Post

Hole

21. Front Threaded Handle

Holes

22. Bobbin Assembly

23. Needle Plate

24. Front Wheel Base

25. Oval Position Guides

26. Rear Wheel Base

27. Wheels (4)

Rear

Diagram C

28. Spool Pin 1

29. Laser Stylus Power

Connector

30. Front Electronic Control

Pod

31. Serial Port for Stitch

Regulator

or Foot Control

32. Foot Pedal Connector

33. Rear Handle Bar Serial

Port

34. Rear Threaded Handle

Holes

35. Power Cord Connector

36. On/Off Switch

37. Back Power Pod

38. Spool Pin 2

Diagram C

Diagram B

HQSixteen User Manual 1.6 Page 3


Note: A HandiQuilter “Welcome” DVD is included with your HQSixteen Machine.

Review the DVD and these instructions to better understand how to setup and use

the HQSixteen.

HQSixteen Stitch Regulator Installation—For Stitch Regulated Machines Only

(Skip to page 6 for non-stitch regulated machines.)

Directional Conventions: Orient yourself to the machine as if you were standing

behind the machine facing the Hand Wheel; User Right and User Left, then Machine

Front (Needle Side), Machine Rear (Hand wheel) (see Photo 1).

REAR

USER

RIGHT

Photo 1

FRONT

1. Place the carriage on the table rails ensuring that the Front Encoder Assembly will be

toward the front of the machine (the needle side of the machine). The front side of the

carriage has a longer distance from the end of the carriage to the cross bar. The back

side of the carriage has a shorter distance from the end of the carriage to the cross bar.

Be sure to place the carriage on the frame correctly (see Photo 2).

Back

(shorter)

Front Encoder

Assembly

Photo 2

Front

(longer)

HQSixteen User Manual 1.6 Page 4


2. Place the machine on the carriage.

3. Plug the Ribbon cable into the Front Encoder Assembly. The ribbon cable has a red

colored wire which goes on top.

4. The remaining length of cable comes back under the machine from the Rear Encoder

Assembly, in front of the rear base, up and over the rear base, under the protruding

display pod and connects into the 9 pin serial port of the machine (see Photo 3).

Photo 3

5. REMEMBER that if the machine is to be removed from the carriage, the cable must be

disconnected from the Front Encoder Assembly on the carriage. The other two

connectors on the cable should remain in place. Failure to unplug the cable when

removing the machine from the carriage could result in damage to the cable, encoders,

and carriage.

HQSixteen User Manual 1.6 Page 5


Installing Optional Front Handles

Caution: Unplug the HQSixteen from the electrical

outlet. All power to the machine must be turned off when

installing the front handles. Failure to do so can result in

damage to the machine.

Important note: Care must be taken to not pinch the

ribbon cable under the handle bar when it is tightened

to the machine. Locate the two longest bolts and the

appropriate Hex wrench. To install the handles, tilt the

screen forward. Line up the two holes on top of the handles

with the pre-drilled holes on top of the machine. Slide a bolt

into each hole until it stops. Hand tighten, and then use the

Hex wrench to securely fasten the handlebars to the

machine (see Photo 4).

Photo 4

Once both bolts are in place, plug the ribbon connector into

the serial port on the back casing of the machine (see diagram B, #19). Make sure the pins

are lined up so they are not damaged when the plug is pushed in. Push the plug securely

in place.

Installing Optional Rear Handles

Check that the HQSixteen is unplugged from the electrical outlet. All power to the

machine must be turned off when installing the back handles. Failure to do so can result in

damage to the machine.

The rear handle bar comes mounted with three screws to the “L” bracket. Line up the two

holes in the “L” bracket with those on the rear of the machine. Slide the short bolts into

holes until they stop. Hand tighten, and then use the Hex wrench to securely fasten the

handle to the back of the machine.

Once the two bolts are in place, plug the ribbon connector into the serial port underneath

the rear handle (see diagram C, #33). Ensure the pins are lined up so they are not

damaged when the plug is pushed in. Push the plug securely in place.

Note: After the handles have been completely installed and plugged in, test them by turning the HQSixteen

on/off switch to “on”. The handlebars will run a self-test by briefly displaying their version during boot up and

then the LED lights on the front handles will illuminate. After the boot up is completed, all three LCD displays

(side, front handle and rear handle) will display the same menu. If nothing is displayed or if the lights don’t

illuminate, check that the handle bar cable on the side of the machine is plugged in securely, that your machine

is turned on, and that the power cord is plugged into the machine as well as a power source.

HQSixteen User Manual 1.6 Page 6


FOR TRADITIONAL SIT-DOWN QUILTING

MACHINES ONLY

Installing the Foot Controller

HQ foot control: Insert the foot control plug into the 9 pin

serial connector on the side of the electronic control pod (see

Diagram D).

Installing the Power Cord

Insert the cord into power connector on the rear of the machine.

Plug the three-prong end into power source (see Photo 5).

Inserting (or changing) the Needle

Check that all power is turned off.

Photo 6

Diagram D

Power

Connector

Photo 5

1. Move the needle bar to the highest

position by turning the hand wheel or

pressing the needle up/down control

on the handles.

2. Loosen the needle bar clamp screw

with the appropriate Hex wrench (see

Photo 6).

3. With the scarf (small ground out

section/dip on the back side of the

needle just above the needle eye)

Diagram E

facing toward the handwheel side of the machine, and the long

groove down the front of the needle facing the bobbin case

side (see diagram E), push the needle all the way up into the

needle bar – until it can go no farther.

HQSixteen User Manual 1.6 Page 7


4. Carefully tighten the needle bar clamp screw. Over tightening the needle clamp screw

will result in damaged threads stripping the hole. Stripped holes are not covered under

warranty. Another side effect of damaged threads from over tightening is the needle

may be very tight when inserted up into the needle bar. To avoid over tightening the

screw, put the long end of the Hex wrench into the screw and finger tighten only.

Note: Changing the needle is recommended for each new quilt loaded on the machine or any

time the needle becomes bent, dull or burred.

Important: Check the needle to confirm it is fully inserted. The needle bar has a stop/sight

hole above the needle bar clamp screw – make sure the needle is touching the top of the

stop/sight hole. If it is not, the machine timing will be off and it may be possible for the

needle to collide with internal parts causing damage not covered by warranty.

Adjusting the Hopping Foot

The foot is adjusted at the factory and should not be moved without consulting the

manufacturer.

Installing the Thread Mast

Locate the threaded hole on top of the machine near the

rear by the hand wheel. The thread mast comes with the

washer and nut on it. Remove the nut and washer, replace

the nut onto the mast and then place the washer under the

nut and onto the machine painted surface. The washer

protects the painted surface when the nut is tightened.

Tighten the mast clockwise until it is securely in place. Use

the nut to secure the mast to the machine.

Note: The eyelets of the thread mast MUST be centered

over the spool pins – so the cone will not pull, turn or tilt

causing thread tension problems (see Photo 7).

Installing the Laser Stylus

Begin by locating the laser stylus guide post, the laser holder and the

laser stylus.

To attach the laser stylus to the top of the machine:

1. Locate the threaded hole on top of the machine near the front (see

diagram B, #20). The laser stylus guide post comes with the

washer and nut on it. Remove the nut and washer, replace the nut

onto the post and then place the washer under the nut and onto the

machine painted surface. The washer protects the painted surface

when the nut is tightened. Tighten the post clockwise until it is

securely in place. Use the nut to secure the post to the machine.

Photo 7

Diagram F

HQSixteen User Manual 1.6 Page 8


Be sure the laser stylus is inserted into the laser clamp.

2. Slide the laser clamp over the post to the desired height.

3. Plug the laser into the top port on the side of the front electronic control pod (see

diagram C, #29).

To attach the laser stylus to the side of the machine:

1. Place the nut on the laser stylus guide post with the washer under it

and thread the laser guide post into the threaded hole at the front of

the machine (see diagram A, #14), near the rear wheel base. Turn

until securely in place. Lock in place with lock nut – the washer will

be under the nut to protect the machine paint. (An unused spool pin

can also be used to mount the laser—see Photo 8).

Follow steps 2-4 above

Laser Stylus Safety and Use Guidelines

Photo 8

Theory of Operation

The laser stylus projects a straight laser beam visible as a dot on surfaces it hits. The laser

dot is used as a guide or stylus allowing you to stitch the same pattern onto a quilt that is being

traced with the laser dot.

Laser Operation and Use

There is not a separate on/off switch for the laser. Power is supplied to the laser when it is

plugged into the HQSixteen. Be sure the laser is attached to the HQSixteen and pointed

downward toward the table before connecting it to the port. Never point it in a direction that

would project the beam into someone’s eyes. If the laser should cease to operate, check to

ensure the plug is firmly seated into the HQSixteen laser port.

Caution: Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

Laser Focus/Laser Image Size

This high quality laser is focusable. The laser is focused by simply grasping the threaded

housing surrounding the lens and turning clockwise or counter clockwise

(see Photo 9). The laser image can be adjusted bigger or smaller. The

direction of rotation needed is determined by the distance of the laser from

the intended focal plane. Experiment by turning the threaded end to

achieve your desired focal size.

Clamp Adjustment

The laser attaches to a mounting post. The post may be vertical or

horizontal. The clamp is designed to articulate any direction by rotating the

clamp on the post and pivoting the laser up or down. To make an

adjustment, simply loosen the black thumbscrews, position, and retighten.

Location of Laser Labels

The label is attached to the case of the laser and contains an arrow which

indicates the direction the laser light will shine when energized. The label

Photo 9 must remain in place on the laser. Removal of the label will void the

laser’s warranty.

HQSixteen User Manual 1.6 Page 9


Threading the Machine

1. Place cone or spool of thread on spool pin. Pass the thread through the thread mast

eyelet from back to front, continuing to thread guide A.

2. Continue to three-hole thread guide B. Wrap all three holes from back to front,

handwheel side to needle side (see Detail 1 below).

Note: The purpose of this guide is to prevent loops of thread coming off the thread

cone from going into the top tension as a knot causing thread breakage and bad

tension. For most threads on a cone, it is important to thread all three holes for

consistent results – should top thread tension need to be adjusted it should be done at

the top tension assembly.

3. Thread continues through thread guide C, and then down to the tension assembly

(see Detail 2 below).

NOTE: It is important that the thread is “flossed” up between the two tension discs. If

the thread is not firmly in place between the two tension discs, the thread rests on the

outside of the tension discs (without tension) and looping on fabric or thread nests may

occur.

Diagram G

4. Once the thread is in place, be sure that the thread catches on the take up spring and

then pull it down under the stirrup (thread guide D).

HQSixteen User Manual 1.6 Page 10


5. Bring the thread back up through the take up lever from back to front, and then down

through thread guide E.

6. Pull the thread down to the needle thread guide and thread through the hole.

7. Make sure the thread is following the groove down the front of the needle and threads

from front to back. Be careful that the thread does not twist around the needle.

Note: To test that the machine is threaded correctly and the tension is correct, carefully

pull the needle thread - taking care to not bend the needle. It should pull smoothly with

light to medium tension.

Important notes: The HQSixteen quilting machine does not have a presser foot lever or top tension release

like a home sewing machine. On a home sewing machine the top tension is released when the presser foot is

raised allowing the thread to come freely out of the machine. When a home machine is threaded the tension

discs are released and open for the thread to easily fall between the tension discs. This is not the case with the

HQSixteen quilting machine where the top tension is always tight and the tension discs are never open.

Therefore, the thread must be pulled up or “flossed” between the tension discs or it will stay outside the discs

and float without tension, causing serious tension problems and or thread nests. It is also possible to bend the

needle while it is threaded if care is not taken while moving the machine around the quilt because the top

tension is never released.

Optional Horizontal Spool Holder

1. An optional horizontal spool holder is available for metallic

and specialty threads wound on a spool (not a cone).

2. The horizontal spool holder mounts on the laser stylus guide

post on the top of the machine (see Photo 10).

3. When using threads on the Horizontal Spool Holder, skip

thread guide A. Thread the top hole only of the three-hole

thread guide B, back to front.

Photo 10

HQSixteen User Manual 1.6 Page 11


Bobbin and Thread Tension Adjustments

Inserting the Bobbin

1. Place the bobbin in the bobbin case so that the thread pulls

off clockwise when viewing the open side.

2. Slide the thread through the slot and under the tension

spring leaving 5-6 inches of thread hanging loose.

3. Do not lift the lever on bobbin case. Fit the bobbin case onto

the hook spindle in the machine. Rotate the casing until the

open throat keys into the alignment notch in the middle of the

hook. Push the casing in until it stops in place. Push inward

until it clicks (see Photo 11).

Note: It is not suggested that the lever on the bobbin case be used for this installation.

The latch lever should be used only for removal of the bobbin case.

4. Turn off the power switch while inserting the bobbin case or anytime the hands are near

the needle area.

Drawing up the Bobbin Thread to the Top of the Quilt

1. After the machine is threaded, locate needle up/needle down button on the left handle.

If the machine is used without handles for sit down use, press the heel of the foot pedal

for needle down.

2. While firmly holding the tail of the needle thread, press the needle up/down button with

free hand bringing the needle back to the up position. For sit down use, push the heel of

the foot pedal to bring the needle back up.

3. Pull the machine 3-4 inches away while holding the needle thread.

4. Bobbin thread will pull up through to the top allowing you to grasp the loop and pull it to

the desired length.

Bobbin Tension

The bobbin tension is the foundation tension for the entire

machine. To test that bobbin tension is correct, hold the

bobbin case in the palm of your hand with the open end

facing up - wrap the thread around your index finger and

while pulling up on the thread and wiggling the finger front to

back (not up and down which is not consistent), the bobbin

case should lift up on its side, but NOT lift out of your hand.

If it will not lift up onto its side, it is too loose and if it lifts out

of your hand, it is too tight. The small screw in the center of

the tension spring is where the adjustment is made (see

Photo 12). Turn clockwise to tighten and counterclockwise

to loosen the bobbin case tension. Check your bobbin

tension every time a new bobbin is inserted.

Photo 11

Photo 12

HQSixteen User Manual 1.6 Page 12


Top Tension

Puckering, gathers and thread breakage occur when the top tension is too tight. Loops and

thread nests occur on the back when the top thread tension is too loose. Tension may need to

be adjusted depending on the fabric, thread or batting you are using on each project.

Important: Top tension should be adjusted after the bobbin case foundation tension adjustment is

made.

To adjust the top tension tighter, turn the tension knob clockwise. To loosen the tension, turn

the tension knob counter-clockwise. If the bobbin case tension is adjusted a degree on the

screw the top tension may need to be adjusted a ¼ to ½ turn to compensate or balance the

tension.

Note: Before adjusting your top tension remember to floss or pull the top thread up into the tension

discs or it will float outside the discs providing little or no top tension. This could cause significant

tension or nesting problems on the bottom side of the quilt.

Consistently using the same thread will reduce your tension issues. If you use multiple brands,

weights, types, colors, qualities, and mixes of threads, many tension variables will be created

and more tension adjustments will be required. Dark threads will be heavier (because of dye)

than light threads of the same weight, type and brand also affecting tension settings. The

more consistent one is, the fewer variables will be involved.

Maintenance

Cleaning and Lubricating the Machine

Only use light sewing machine oil in the HQSixteen.

Internal oiling is not necessary on the HQSixteen

except when the machine is taken to a service technician

for routine maintenance and cleaning. The bobbin

basket assembly, however, needs regular lubricating.

Failure to keep the bobbin assembly lubricated can

cause severe damage to the machine. To lubricate, turn

off the machine. Clean around the bobbin assembly with

a soft brush to remove lint.

Put a very small drop of oil on the hook in the bobbin

assembly (see Photo 13). (Remove bobbin and case

before oiling). The frequency depends upon the usage of

Photo 13

the machine. Lubricating is recommended before running

the machine if it has not been used regularly, or every other bobbin change if used frequently.

After oiling, always sew a scrap piece as oil may cling to thread. Over oiling can cause excess

dripping from the bobbin assembly. Lack of lubricant may be noticed by a change in the sound

of the machine and will affect stitch quality.

HQSixteen User Manual 1.6 Page 13


Using the Displays on the Handles and Side of Machine

Machine and Handlebar Menus

Note: Review the HandiQuilter “Welcome” DVD for interactive instruction on the HQ

Sixteen menu functions.

The HQSixteen has a settings menu display on the front and rear mount handles as well as

the front side pod. Settings may be changed at any one of these locations.

Use the Up or Down arrows and then press “Select” to access a submenu or to change a

selection:

Selection Type Function

Quilt Mode Manual Mode: Allows the usertomanually operate the machine at a selected

needle speed.

Needle

Up/Down

Regulated: (See HQ Stitch Regulator Operation,

page 17, for more information). Allows the userto

select a specified stitch length and the machine

regulates the motor speed. The machine will

maintain an appropriate motor speed for the

selected stitch length if the user moves the

machine in a consistent manner.

Note: Radical movements or changes in speed will

defeat the regulator, causing irregular stitches.

Moving the machine too fast or too slow will defeat

the regulator feature, also causing irregular stitches.

Stitches Per Inch: Allows the userto determine the stitch length

desired. Can be set from 4-15 stitches per inch.

Select: Press to accept user selection and return to the main menu.

Programs the needle to automatically return to the up or down position when

stopped. Press Select totoggle between Needle Up and Needle Down.

Stitch Half/Full Programs the needle to take a half or full stitch when Needle Up/Down button is

pressed. Press Select totoggle between Stitch Half and Stitch Full.

Lights On/Off/ Lighting consists of multiple LED light clusters (bulbs) mounted on the underside of

Spot/Part the handlebars. Twelve LED light clusters are included with the HQSixteen. Up

to eight additional light clusters can be purchased and inserted into expansion light

ports.

Diagnostic

Mode

Press Select totoggle through four white LED

lighting options.

Lights on: Turns all bulbs on.

Lights off: Turns all bulbs off.

Lights spot: Engages spot lighting by

turning on the bulbs set to “on” in the Light

Mode menu (see Light Mode below). Spot

lights are the four bulbs closest to the

machine (two bulbs on each side of the

handlebars). All other lights are turned off.

Lights part: Engages partial lighting by turning on all bulbs except the spot

lights. The four bulbs closest to the machine are turned off.

Allows an authorized representative to run diagnostics on the HQSixteen.

HQSixteen User Manual 1.6 Page 14


Set Up Alarm Mode: Allows the userto set overspeed

alarm.

Overspeed: Alarm beeps to indicate that

the machine is no longer sewing in

regulation mode because the machine is

being moved too fast. Press Select to

toggle between Y (yes, alarm is on) or N

(no, alarm is off).

Exit Menu: Press Select to return to the

Set Up menu.

My Speed: Allows the userto select the needle speed at which the machine starts

each time it is turned on in manual mode. Press the Up ↑ or Down ↓ to select your

speed. Press Select to return to the Set Up menu.

Light Mode: Used to selectively turn on/off two

LED light clusters (bulbs) nearest to the machine

on each side of the handlebar.

Use the Up ↑ or Down ↓ arrows to point to the left

rear, right rear, left front, or right front bulbs. The

light positions on the menu screen correspond to

the bulb position on the handlebar. Press Select to

turn a bulb on/off. An asterisk indicates the bulb is

on. The small circle indicates the bulb is off.

To return to the Set Up menu, press the Up ↑ or

Down ↓ arrow points to Exit and press Select.

Counters: Counts the total number of stitches on the machine over the life of the

machine and during a time period defined by the user.

L (Lifetime): Stitch count over the life of the machine. This count can not

be reset.

T (Trip): Can be used to count the number of stitches in a project or over a

specific time frame defined by the user. To reset the trip stitch count, use

the Up ↑ or Down ↓ arrows to point to Reset and press Select.

To return to the Set Up menu, press the Up ↑ or Down ↓ arrow points to

Exit and press Select.

Walking On/Off: Turns the walking stitch feature on/off. When the Needle

Up/Down button on the handlebar is pressed and held, the machine will make slow

stitches until the Needle Up/Down button is released. The walking stitch can be

used to tie off stitches at the beginning and end of quilting, or to make a full stitch

when half stitch is selected in the Main Menu.

Exit Menu: Press Select to exit setup and return to the main menu.

HQSixteen User Manual 1.6 Page 15


Using the Handle Buttons

The following functions take effect by pressing and then quickly releasing the button:

Selection Type Function

Needle Up/Needle Down Allows the usertomanually move the needle one half stitch or one

full stitch at a time. Half or full stitch is set by the user on the settings

menu.

Start/Stop Starts and stops the machine.

Walking Stitch: The machine will make slow stitches when Needle

Up/Down is pressed and held. Note: Walking must be set to On in

the set up menu for this feature (see page 15).

Speed Up By pushing the plus sign, the speed of the machine will gradually

increase. The % of machine needle speed is displayed on the Menu

bar ranging from 10-100%. (Manual mode only)

Speed Down By pushing the minus sign, the speed of the machine will gradually

decrease. The % of machine needle speed is displayed on the Menu

bar ranging from 10-100%. (Manual mode only)

HQSixteen User Manual 1.6 Page 16


HQ STITCH REGULATOR OPERATION

To use regulation mode it must be selected from the SETTINGS MENU.

1. Scroll until you can see QUILT MODE from the MENU and

press SELECT (Photo 14).

2. Choose REGULATED from the QUILT MODE MENU and

press SELECT.

3. The menu prompts you to select the number of STITCHES

PER INCH you desire (Photo 15). Select any number from 4

to15 stitches per inch by pressing the up/down arrows (the

larger the number, the smaller the stitch). Press SELECT to

return to the main MENU.

4. The DISPLAY will now indicate on the first line that the

machine is in REGULATION MODE and will display the

STITCHES PER INCH.

5. From the front or rear handles, press START and begin

moving the machine. The needle will immediately start

stitching. As you move the machine, your stitches will be

regulated to the length set in step 3. If you press START and

don’t move the machine, the needle will start stitching, but

will stop after 3-4 stitches.

Photo 14

Photo 15

IMPORTANT NOTES

You can stop the machine at any time by pushing the START/STOP key. If you don’t move the

machine after 3 or 4 stitches, the machine will stop and position the needle.

It is important to not move the machine too fast since this will result in an OVERSPEED

CONDITION, during which, the machine drops out of regulation until you slow your motions to

below 100% of motor capacity. A beep will sound when your speed is over 100% unless the

overspeed alarm is disabled. If you desire, the overspeed alarm can be disabled by selecting

SETUP from the MENU, then choose ALARM MODE.

You can return to MANUAL mode from the MENU by scrolling to QUILT MODE and pushing

SELECT. Choose MANUAL MODE and press SELECT.

HQSixteen User Manual 1.6 Page 17


To Begin Quilting

Thread Requirements

Threads have a tendency to dry or wet rot over a period of time. Be sure to choose high

quality threads for your valuable heirloom quilts. Most machine quilting threads on the

market today are acceptable.

Needle Requirements

For general quilting, a size 16/100 needle will accommodate most threads and fabrics.

Heavier threads, such as top stitch and some decorative threads, require a larger

needle such as 18/110 or 20/120. Lofty batts and heavier fabrics such as denim,

canvas or densely woven fabric may also require a larger needle.

To Prepare for Quilting

With any quilting machine, it is important to understand the basics of free motion

quilting. The HQSixteen Quilting Machine does not have feed dogs like domestic

machines; therefore, the fabric does not automatically feed under the hopping foot. The

operator should synchronize the speed as well as the movement of the machine to get

an even, consistent stitch.

In order to become comfortable with the free motion of the HQSixteen, users can

begin with a few “beginner” techniques.

In Manual Mode: Set the machine at a medium speed and begin moving it until you

become accustomed to the resistance. By moving the machine faster, the stitches begin

to elongate. The stitch speed can either be increased or the machine can be moved

slower to get the stitches back to the desired length. By moving the machine slower, the

stitches get shorter and can build up on top of each other, breaking the thread or

making it extremely difficult to unpick. The stitch speed can be decreased, while

maintaining a constant motion with the machine to bring the stitches back to the desired

length.

In Stitch Regulator Mode: Set the machine to desired stitch length. Begin moving the

machine to become accustomed to the resistance. The machine motor will slow down

or speed up to maintain a consistent stitch length according to how quickly or slowly you

move the machine. Moving the machine too fast or in radical or jerky movements will

defeat the stitch regulator function.

When pressing START on the front or rear handle bars, make certain to begin moving

the machine immediately. If the needle stitches in one place too long, the stitches build

up on top of each other causing a build up of thread or thread breakage. When bringing

the machine to a complete stop press the STOP button at the same moment the

machine stops moving. If the machine is still moving when the STOP button is pressed,

it can cause deflection in the needle, possibly causing it to bend or break.

When quilting, relax your hands and maintain a light touch on the handlebars. Gripping

the handlebars too tightly may cause body tension resulting in poor quilting quality. The

HQSixteen, combined with any one of its home machine quilting frames will give you

a smooth even glide.

HQSixteen User Manual 1.6 Page 18


Troubleshooting

Stitches are Skipping Corrective Measure

The needle is damaged, dull,

bent, or installed improperly

Incorrect needle size

The needle has not been

positioned properly

Fabric is too tight on the

frame

Thread tension too tight

Improper threading

Replace the needle often, normally once or twice per day for continuous quilting or at least once

per quilt. Use HQSixteen recommended needles.

Always change the needle if the needle has struck any hard object such as a straight pin, etc.

The tip of the needle can become damaged or burred, resulting in fabric damage as well as

skipped stitches, thread breakage or shredding.

Always change the needle if it has been hit, bumped or pulled off center while maneuvering the

machine about the quilt. A slightly bent needle can be a major cause of skipped stitches.

Check for the proper size of needle for the work and thread being applied to the quilting

operation. Some battings and fabrics used in quilting may constrict or impede the thread passing

through the front groove of the needle. This diminishes the

loop lift required for stitch formation. Typically, a larger

needle will solve the problem; however, it has been found

that certain smaller sizes of needles as well as the use of

ball pointed needles solve some specific problems.

Position the needle properly to the needle bar. Inspect the

position of the needle to make sure the needle is at the 6

o’clock position (see Photo 16)—If you stand directly in

front of the needle (facing the bobbin case side of the

machine), you will see the entire needle eye directly facing

you. This is 6 o’clock position.

Make sure (1) the needle is installed all the way into the

needle bar to the needle stop hole in the needle bar, (2)

the long groove in the needle is toward the front (bobbin

case side), and (3) the scarf/scooped out part of the

needle is toward the handwheel.

Photo 16

The needle can sometimes be rotated to 5 o’clock (slightly

right) or 7 o’clock (slightly left) in order to adjust for a more positive thread loop pickup by the

hook point.

Loosen pole tension on the frame. Fabric that is rolled too tight causes the fibers to separate.

This reduces the needle friction on the thread resulting in a smaller thread loop.

Loosen top tension. Re-check top and bobbin tension (see pages 12-13).

Inspect that the thread take-up lever, thread stirrup or tension spring are all threaded correctly.

The Needle Breaks Corrective Measure

The needle is bent or not

installed properly

The needle hits the throat

plate

Replace or correctly change the needle. Make sure that the needle is pushed up into the needle

bar clamp until it can go no farther (visually check that it is up to the top of the stop/sight hole

above the needle bar clamp screw). Failure to do so can cause damage in the bobbin area and

throat plate.

Correctly position the needle, throat plate or hopping foot. Replace with a new needle.

Stitches are Puckered Corrective Measure

The hopping foot applies too

much pressure to the

material

The tension is not balanced

Needle too large for material

Decrease the pressure on the hopping foot by loosening the nut at the base of the hopping foot

shaft. Adjust to the proper height. Note: When tightening the nut on the hopping foot shaft, be

careful not to tighten so tight that it rotates the bar.

Balance the tension of the needle thread after ensuring the bobbin tension is adjusted correctly

(see page 12).

Replace the needle with a size better suited for the fabric.

Stitch Quality is Poor Corrective Measure

The tension is not balanced

Bobbin case is damaged,

corroded, dirty, etc

Moving the machine too fast

for needle speed selected

Adjust the tension of the needle thread after ensuring the bobbin tension is adjusted correctly

(see page 12).

Since thread slides over the surface of the bobbin case at a high speed, make sure the case is

free of any lint or foreign matter that could impede thread passage through the machine.

Synchronize machine movement and needle speed to get roughly 8-10 stitches per inch.

Elongated stitches are an indication of moving the machine too fast for the current speed.

HQSixteen User Manual 1.6 Page 19


Tension is Poor Corrective Measure

“Fuzz” caught under the

tension spring in the bobbin

Hand Wheel Won’t

Rotate

Thread is entangled and

caught in the hook

Thread Nests Under

Quilt

Not enough tension on top

thread

Improper threading

If using short staple threads, inexpensive or industrial threads or coated threads, lint and other

material will build up under the tension leaf spring and begin to lift the spring, reducing the

spring’s ability to compress against the thread. By inserting a needle under the spring and

clearing out the lint, the bobbin tension will return fairly close to its preset tension.

Corrective Measure

Turn off the machine and unplug the machine from the electrical outlet. Lubricate the hook,

strongly turn the hand wheel clockwise and if necessary counterclockwise several times, and

then remove the thread caught in the hook.

Corrective Measure

Check that the machine is threaded correctly. Make certain that the thread is flossed snugly in

place between the two tension discs. If machine is threaded correctly, tighten top tension by

rotating the tension knob clockwise.

Refer to threading diagram and threading instructions (page 10).

Hard to Guide Machine Corrective Measure

Carriage wheels not centered

on track

Thread caught in wheels

Center the carriage wheels on top of the continuous track. Check that the machine carriage has

not “jumped” track. Slightly loosen wheel on one side to allow machine to more easily follow

track alignment.

Remove all thread or debris in wheels. Check that the tracks are free of lint and threads.

Motor Fails to Run Corrective Measure

On/Off switch turned off

Machine not receiving power

Turn the machine on by using the switch on the back electrical control pod.

Check that the power connector is securely plugged into the back of the machine and the threeprong

end is plugged into the power source.

Uneven Quilt Design Corrective Measure

Take-up rollers may be

bowed or bent

Leaders are stretched/worn

Make certain the fabric is not rolled too tight, causing the poles to bow. Check that poles are

inserted completely together with the push pin engaged so bowing won’t occur.

If fabric is beginning to stretch or fray, contact HandiQuilter LLC for replacement leaders.

Needle Thread Breaks Corrective Measure

Thread cones/spools are

poor quality or may have

severe twisting or thread rot

Top and bobbin tensions not

balanced

The machine head has been

threaded incorrectly or

thread spools are not

positioned correctly

Particles in tension discs

Bobbin rotation is not smooth

Needle is burred, bent or dull,

or installed incorrectly

Needle not suited for thread

Hesitating too long at one

point in pattern

Improper needle/hook

relationship

Damage or “Burr” at needle

hole of throat plate or other

thread handling part

Look for severe twisting of threads when approximately 12 to 15 inches has been pulled off,

with the ends pinched together. Cotton threads are particularly susceptible to dry rot or wet rot

which makes thread brittle. Do not use poor quality thread, or thread that is rotted or brittle.

Check thread tension in top and bobbin for proper balance. See pages 12-13.

Check that the machine is threaded correctly.

Inspect for accidental double wrapping of thread on thread guides.

Inspect the thread mast, making sure the eyelets of the mast are directly over the spools.

Inspect the vertical positioning of the thread cones. Tipped cones can dramatically affect thread

tension and can cause breakage.

Inspect for particles and remove any fuzz or debris.

Change the bobbin. The slightest hesitation of the bobbin rotation can be the cause of dramatic

tension change and thread breakage.

Change the needle at least once per quilt. Make sure the needle is installed to the top of the

stop hole in the needle bar.

Replace the needle to one better suited for the thread. Use the proper size needle.

Move more quickly so stitches don’t overlap or build up. When starting the machine, begin

moving immediately. Sewing in one place too long will cause the thread to break.

Timing of the machine is improper. Consult a repair technician.

If thread is shredding at the throat plate, check for burrs or jagged edges. Gently rub with metal

cloth to remove the sharp edge. Consult a repair technician to polish any hard to reach or

delicate areas, or if the burr is inside the throat.

HQSixteen User Manual 1.6 Page 20


Wrong type of needle

Use needles recommended by HandiQuilter LLC. Using the wrong needle with a smaller

shank diameter causes many problems. For example, a system 1738 or 287WH needle with a

shank diameter of 1.64mm will fit loosely into the needle bar clamp. This condition allows the

needles to fit into the clamp at an angle which may cause problems including skipped stitches

and the needle positioned too far away from the hook point.

Other possible problems • Needle too close to hook, causing friction and possible collision of hook point and needle

(broken thread).

• Needle plate damage

• Hook damage

• Broken needles or damaged needle bar clamp

Motor Stall Corrective Measure

Motor Stall The alarm indicates the motor is not responding properly to the speed controls. This may be

caused by a thread lock, mechanical obstruction or an electrical problem.

Clear any thread from the bobbin area ONLY after turning off the power to the machine.

Turn the handwheel and check for tightness.

The motor stall may re-occur if it is caused by an electrical problem. Turn the machine off and

then back on again to reset the computer

* If the troubleshooting above does not eliminate the problem, please consult an authorized HQSixteen representative.

HQSixteen User Manual 1.6 Page 21


www.HandiQuilter.com

You have already flagged this document.
Thank you, for helping us keep this platform clean.
The editors will have a look at it as soon as possible.

Are you sure you want to delete your template?

Magazine: to download HQ Sixteen user manual - Handi Quilter

Sours: https://www.yumpu.com/en/document/view/11253409/to-download-hq-sixteen-user-manual-handi-quilter
  1. Foam crib bumper
  2. 70s cowboy fashion
  3. Jack slack face
  4. Mini projector wifi

MCM #9 – My Thoughts on the HQ TruStitch Stitch Regulator

(Note: This is a pretty wordy post. If you don’t want to read about the regulator, just scroll on down to the linky party. I totally understand!) 🙂

So, about a week ago I mentioned that I purchased the TruStitch Stitch Regulator for my Handi Quilter Sweet Sixteen. I wanted to get some practice in with it so I could tell you how it is working for me. I have been doing a lot of quilting recently, so I have had plenty of opportunity to work with it.

First, let me give a bit of background info. I have owned my Sweet Sixteen for almost 1-1/2 years and I have to say I absolutely love it. It has allowed me to get more tops quilted and really experiment and play with free motion quilting. When I originally bought my machine I didn’t order the stitch regulator for two reasons. The first reason – I had never seen one or tried to use one and I wasn’t sure it was something I wanted to fiddle with while maneuvering a large quilt around. Because of that, and the cost, I decided to pass. I had read comments from many people who said that, with practice, a person should/could be able to get pretty consistent stitches without the regulator. I had my fingers crossed that was true.

Then two things happened within a few days of each other — let’s just say that the quilt gods intervened — and I found myself with the stitch regulator.

In case you don’t know, the system consists of a receiver that plugs into your machine. The foot pedal then plugs into the receiver. Then there is a controller that is the brains of the system. The controller is placed under the quilt sandwich and a magnet is placed on top to hold it in place. When you move the quilt while stitching, the controller sends a message to the receiver and the receiver speeds up or slows down the stitch speed, depending on your quilt movements.

TruStitch ControllerThis is the controller; the black knob on top is the magnet. (The red piece was quilted without the stitch regulator – I just wanted you guys to be able to see the white controller.)

As with anything, there is a learning curve. There are settings for the length of stitches (stitches per inch), and quilting speed. It takes a bit of practice to find your best settings, and then those will change depending on what you are quilting.

Tru Stitch Screen

You can switch between regulated stitching and manual just by pressing the Stitch Mode button.

Before the stitch regulator – I’ll admit that there are times when I am in a hurry to get a quilt finished and my stitches don’t look so good. They are long and short and just all over the place. Then there are the times when I think they look pretty darn good. You know, when you’ve got your quilty flow-mo going on and everything is good.

I took a couple pictures so you can compare my stitches yourself. This first picture shows my stitching without the stitch regulator and me thinking my stitches didn’t look too bad.

Manual Stitching without regulatorYou can see the shorter stitches I have pointed out. Overall, this piece looks okay, but those curves get me every time! Now, let me say – overall I would be happy with this. By the time this quilt is washed no one will notice unless they are the stitch police.

TruStitch Regulated Stitches

The stitches in the above photo are with the stitch regulator and much more uniform. There are a few blips, but that may be user error….. See how nice the stitches are in the curves of the stitched design?

So, even though I would be happy with the first picture, I have to say I really like the consistency of the stitches in the second picture.

Here’s my problem with this system though. That controller is a finicky little thing! It works beautifully on a mini quilt, where there is plenty of room for it to move with the quilt. But, when I’m working on a queen size project this is what my sewing space looks like:

Throat Space Queen Size Quilt HQSS

The excess is behind the needle and rolled up. So while the section under the needle is moving when I’m stitching, the quilt itself isn’t moving much which means the controller isn’t moving. And if the controller isn’t moving, there is no communication to my machine. So I may as well be in manual mode. See how much room I have with a smaller quilt:

Throat Space Mini Quilt

Plenty of room for the controller to move.

My concern that the controller would be one more thing to deal with while quilting on a sit-down machine is a reality. However, I am determined to find a way to make this work. If you own the TruStitch and have any tips or tricks, I would love to hear them!

I really think there will be a time to use the controller and other times not so much. Just like above – that meandering pattern in the green fabric with a thread that blends so well, I didn’t mess with it. I could barely see my stitches while working with the quilt, so I know that no one will notice if a curve has a few smaller stitches. Quilting a wallhanging, baby quilt, lap quilt, or mini would be much easier as the controller has more room to move, and I’m excited to try a mini whole cloth piece with the stitch regulator.

At the end of the day, I am glad I have the TruStitch and yes, I would purchase it again. I really admire the uniform look of the stitches whenever I’m looking at other quilter’s work and hope to achieve that myself. I’ve just got to get that controller under control! 🙂

I know this is a weird Main Crush Monday post. But I really wanted to share my experience with this tool with you – I hope you find it helpful if you are considering purchasing one for yourself. And that finish I was suppose to have done last week? Um, maybe this week….why is it so hard to find time to bind??

Now let’s see what you are crushing on this week! You can link up any blog post, Instagram or Flickr pic – here’s how:

 Loading InLinkz ...
A great post with good pictures of stitching

Sours: https://cookingupquilts.com/mcm-9-my-thoughts-on-the-hq-trustitch-stitch-regulator/
TruStitch Stitch Regulator for Handi Quilter Sweet 16

Note: A Handi Quilter "Welcome" DVD is included with your HQ Sixteen™ Machine.

Review the DVD and these instructions to better understand how to setup and use

the HQ Sixteen™.

HQ Sixteen™ Stitch Regulator Installation—For Stitch Regulated Machines Only

(Skip to page 6 for non-stitch regulated machines.)

Directional Conventions: Orient yourself to the machine as if you were standing

behind the machine facing the Hand Wheel; User Right and User Left, then Machine

Front (Needle Side), Machine Rear (Hand wheel) (see Photo 1).

REAR

USER

RIGHT

1.

Place the carriage on the table rails ensuring that the Front Encoder Assembly will be

toward the front of the machine (the needle side of the machine). The front side of the

carriage has a longer distance from the end of the carriage to the cross bar. The back

side of the carriage has a shorter distance from the end of the carriage to the cross bar.

Be sure to place the carriage on the frame correctly (see Photo 2).

HQ Sixteen™ User Manual 1.6

Back

(shorter)

Photo 1

Front Encoder

Assembly

Photo 2

FRONT

Front

(longer)

Page 4

Sours: https://www.manualslib.com/manual/752676/Handi-Quilter-Hqsixteen.html?page=6

Stitch hq regulator sixteen

HQ Sweet Sixteen | Quilting Sewing Machine TruStitch Stitch Regulator

HQ Sweet Sixteen Machine:
Introducing the most technologically advanced way to sit-down free motion quilt with stitch-regulation. Handi Quilter’s HQ Sweet Sixteen is simply the best way for quilters to tackle projects with a sit-down machine. With the introduction of TruStitch, quilters are now able to create quilt designs with beautifully even stitches.

HQ Sweet Sixteen Sit-down Table:
The machine is inserted into a bi-level table for a smooth, even quilting surface. Size: 36″ wide by 30″ deep. Table adjusts in height from 27″ to 40″. You can purchase additional 18″ table extensions that can attach to both sides of the machine, and a table overlay for smooth rulerwork.

TruStitch Stitch Regulator with Overlay:
Innovative stitch-regulation system for the HQ Sweet Sixteen that measures controller movements on the table surface for choreographed stitch-regulation. TruStitch is perfect for free-motion quilters of all levels from beginning to advanced. Includes white plastic overlay that attaches to the HQ Sweet Sixteen tabletop to create a continuous surface for use with the TruStitch™ stitch regulator.

**Shipping not included, visit Machine Room for details.





Sours: https://www.quiltingmayhem.com/shop/c/p/HQ-Sweet-Sixteen-Quilting-Sewing-Machine-TruStitch-Stitch-Regulator-x29589511.htm
Stitch Regulation In Action – Getting Started with HQ Simply Sixteen

.

You will also like:

.



216 217 218 219 220